Cisco CB21AG Installation And Configuration Manual
Download Installation and configuration manual of Cisco AIRONET CB21AG Adapter, Network Router for Free or View it Online on All-Guides.com.
Brand: Cisco
Category: Adapter , Network Router
Type: Installation and configuration manual
Model: Cisco AIRONET CB21AG , Cisco AIRONET PI21AG
Pages: 226 (4.69 Mb)
Download Cisco AIRONET CB21AG Installation and configuration manual
6-7
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-02
Chapter 6 Using EAP Authentication
Using LEAP with a Saved Username and Password
The LEAP Authentication Status window appears.
Step 5 If your client adapter authenticates, the window shows that each stage was successful and then
disappears. ASTU and the Link Status field on the ADU Current Status window show Authenticated.
If the authentication attempt fails, ASTU and ADU show Authentication Failed, and an error message
appears after the LEAP timeout period has expired. Refer to the “Error Messages” section on page 10-12
for the necessary action to take.
Using LEAP with a Saved Username and Password
After Profile Selection or Card Insertion
After you (or auto profile selection) select a profile that uses LEAP authentication with a saved LEAP
username and password or you eject and reinsert the client adapter while this profile is selected, the
following events occur:
1. The LEAP Authentication Status window appears.
2. If your client adapter authenticates, the window shows that each stage was successful and then
disappears. ASTU and the Link Status field on the ADU Current Status window show Authenticated.
If the authentication attempt fails, ASTU and ADU show Authentication Failed, and an error
message appears after the LEAP timeout period has expired. Refer to the “Error Messages” section
on page 10-12 for the necessary action to take.
After a Reboot or Logon
After your computer reboots or you log on, the following events occur:
1. After you enter your Windows username and password, the LEAP authentication process begins
automatically using your saved LEAP username and password.
Note If you unchecked the No Network Connection Unless User Is Logged In check box on the
LEAP Settings window, the LEAP authentication process begins before the Windows login
window appears.
2. If your client adapter authenticates, the LEAP Authentication Status window shows that each stage
was successful and then disappears. ASTU and the Link Status field on the ADU Current Status
window show Authenticated.
If the authentication attempt fails, ASTU and ADU show Authentication Failed, and an error
message appears after the LEAP timeout period has expired. Refer to the “Error Messages” section
on page 10-12 for the necessary action to take.
3. Windows continues to log you onto the system.