Cisco CB21AG Installation And Configuration Manual
Download Installation and configuration manual of Cisco AIRONET CB21AG Adapter, Network Router for Free or View it Online on All-Guides.com.
Brand: Cisco
Category: Adapter , Network Router
Type: Installation and configuration manual
Model: Cisco AIRONET CB21AG , Cisco AIRONET PI21AG
Pages: 226 (4.69 Mb)
Download Cisco AIRONET CB21AG Installation and configuration manual
5-21
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-02
Chapter 5 Configuring the Client Adapter
Setting Security Parameters
Fast roaming (CCKM) Choose WPA and LEAP; then set
LEAP settings
Use Cisco IOS Release 12.2(11)JA
or later, choose a cipher suite that is
compatible with CCKM, and
enable Network-EAP and CCKM
for the SSID
Note To allow both 802.1X
clients and non-802.1X
clients to use the SSID,
enable optional CCKM.
Reporting access points
that fail LEAP
authentication
No settings required; automatically
enabled
No settings required; automatically
enabled in the firmware versions
listed on page 5-17.
MIC No settings required; automatically
enabled
Set up and enable WEP with full
encryption, set MIC to MMH or
check the Enable MIC check box,
and set Use Aironet Extensions to
Yes
TKIP No settings required; automatically
enabled
Set up and enable WEP, set TKIP to
Cisco or check the Enable Per
Packet Keying check box, and set
Use Aironet Extensions to Yes
Broadcast key rotation Enable LEAP, EAP-TLS, or PEAP Set up and enable WEP and set
Broadcast WEP Key Rotation
Interval to any value other than
zero (0)
Table 5-4 Client and Access Point Security Settings (continued)
Security Feature Client Setting Access Point Setting