Cisco CB21AG Installation And Configuration Manual
Download Installation and configuration manual of Cisco AIRONET CB21AG Adapter, Network Router for Free or View it Online on All-Guides.com.
Brand: Cisco
Category: Adapter , Network Router
Type: Installation and configuration manual
Model: Cisco AIRONET CB21AG , Cisco AIRONET PI21AG
Pages: 226 (4.69 Mb)
Download Cisco AIRONET CB21AG Installation and configuration manual
5-31
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-02
Chapter 5 Configuring the Client Adapter
Setting Security Parameters
Figure 5-10 Advanced Configuration Window
b.
Leave the Specific Server or Domain field blank to allow the client to accept a certificate from
any server that supplies a certificate signed by the certificate authority listed in the Network
Certificate Authority drop-down list on the Define PEAP (EAP-GTC) Configuration window.
c. If the Login Name field is not filled in automatically, enter your username with nothing after it
(for example, jsmith).
d. Click OK to save your settings.
Step 9 Click OK in each window to save your settings and to return to the Cisco Aironet Desktop Utility
(Profile Management) window.
Step 10 Refer to Chapter 6 for instructions on authenticating using PEAP (EAP-GTC).
Enabling PEAP (EAP-MSCHAP V2)
Follow the steps below to enable PEAP (EAP-MSCHAP V2) for this profile.
Step 1 Perform one of the following:
• If you want to enable PEAP (EAP-MSCHAP V2) without WPA, choose 802.1x under Set Security
Options and PEAP (EAP-MSCHAP V2) in the 802.1x EAP Type drop-down box.
• If you want to enable PEAP (EAP-MSCHAP V2) with WPA, choose WPA under Set Security
Options and PEAP (EAP-MSCHAP V2) in the WPA EAP Type drop-down box.
Note Refer to the “Wi-Fi Protected Access (WPA)” section on page 5-16 for additional information
on WPA.
Step 2 Click Configure. The Define PEAP (EAP-MSCHAP V2) Configuration window appears (see
Figure 5-11).