Cisco DPC2425 User Manual
Download Operation & user’s manual of Cisco DPC2425 Adapter, Gateway for Free or View it Online on All-Guides.com.
Brand: Cisco
Type: Operation & user’s manual
Model: Cisco DPC2425 , Cisco EPC2425
Pages: 110 (9.15 Mb)
32 4028315 Rev A
How Do I Configure My DOCSIS Residential Gateway?
Basic Settings
The following table provides a description of the pages available from within the
Basic Settings section of the Setup page.
Field Name Description
Password Settings Use this link to set or modify your password settings
Set Time Use this link to enable or disable time synchronization
by Network Time protocol
Network Configuration Use this link to enter or modify the basic settings for
your network
LAN IP Address
Management
Use this link to configure how Internet protocol (IP)
addresses are assigned and managed in your network
Fixed CPE IP Assignment Use this link to reserve IP addresses in the DHCP pool
that will be used as static IP addresses in your local
network.
Restart Modem Use this link to restart your residential gateway
Save Configuration to
your PC
Use this link to save your cable modem RG
configuration to your local PC and to restore the RG
configuration to your residential gateway, if necessary
Advanced Settings
The following table provides a description of the pages available from within the
Advanced Settings section of the Setup page.
Field Name Description
Options Use this link to enable or disable advanced features on
your network
IP Address Filtering Use this link to configure IP address filters. These
filters prevent designated IP addresses from accessing
the Internet
MAC Address Filtering Use this link to configure MAC address filters. These
filters prevent designated MAC addresses from
accessing the Internet
Port Filtering Use this link to configure transmission control protocol
(TCP) and user datagram protocol (UDP) port filters.
These filters prevent a range of TCP/UDP ports from
accessing the Internet
Port Forwarding Use this link to configure port forwarding for local IP
addresses. Port forwarding allows you to run a server
on the local area network (LAN) by specifying the
mapping of TCP/UDP ports to local PCs or to the IP
address of other devices. This is a static setting that
holds the ports open at all times