Cisco SPA1112 Provisioning Manual
Download Provisioning manual of Cisco SPA1112 Adapter, Gateway for Free or View it Online on All-Guides.com.
Brand: Cisco
Category: Adapter , Gateway , IP Phone
Type: Provisioning manual
Model: Cisco SPA1112 , Cisco SPA122 , Cisco SPA232D
Pages: 213 (1.69 Mb)
Voice Parameters
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters 100
6
<Ans_Call_Without_Reg_1_> through
<Ans_Call_Without_Reg_13_>
Allow answering inbound calls without successful (dynamic)
registration by the unit.
Default setting: no
<Use_DNS_SRV_1_> through <Use_
DNS_SRV_13_>
Whether to use DNS SRV lookup for Proxy and Outbound
Proxy.
Default setting: no
<DNS_SRV_Auto_Prefix_1_> through
<DNS_SRV_Auto_Prefix_13_>
If enabled, the ATA will automatically prepend the Proxy or
Outbound Proxy name with _sip._udp when performing a DNS
SRV lookup on that name.
Default setting: no
<Proxy_Fallback_Intvl_1_> through
<Proxy_Fallback_Intvl_13_>
After failing over to a lower priority server, the ATA waits for
the specified Proxy Fallback Interval, in seconds, before
retrying the highest priority proxy (or outbound proxy)
servers. This parameter is useful only if the primary and
backup proxy server list is provided to the ATA via DNS SRV
record lookup on the server name. (Using multiple DNS A
records per server name does not allow the notion of priority,
so all hosts will be considered at the same priority and the
ATA will not attempt to fall back after a failover.)
Default setting: 3600
<Proxy_Redundancy_Method_1_>
through <Proxy_Redundancy_Method_
13_>
The method that the ATA uses to create a list of proxies
returned in the DNS SRV records. If you select Normal, the list
will contain proxies ranked by weight and priority. If you
select Based on SRV port, the ATA also inspects the port
number based on 1st proxy’s port.
Default setting: Normal
<Mailbox_Subscribe_URL_1_>
<Mailbox_Subscribe_URL_2_>
<Mailbox_Subscribe_URL_5_> through
<Mailbox_Subscribe_URL_13_>
The URL or IP address of the voicemail server.
Default setting: blank
<Mailbox_Subscribe_Expires_1_>
through <Mailbox_Subscribe_Expires_
13_>
The subscription interval for voicemail message waiting
indication. When this time period expires, the ATA sends
another subscribe message to the voice mail server. Default:
2147483647