Cisco WAE-674-K9 - Wide Area Application Engine 674 Installation Manual
Download Hardware installation manual of Cisco WAE-674-K9 - Wide Area Application Engine 674 Adapter, Network Card for Free or View it Online on All-Guides.com.
Brand: Cisco
Category: Adapter , Network Card
Type: Hardware installation manual for Cisco WAE-674-K9 - Wide Area Application Engine 674
Pages: 152 (4.9 Mb)
Download Cisco WAE-674-K9 - Wide Area Application Engine 674 Hardware installation manual
Chapter 6 Troubleshooting the System Hardware
Symptoms and Solutions
6-36
Cisco Wide Area Application Engine 7341, 7371, and 674 Hardware Installation Guide
OL-15012-02
089-XXX-00n Failed microprocessor test.
n = APIC ID for failing
microprocessor:
• 0, 1, 2, 3 = microprocessor 1
• 4, 5, 6, 7 = microprocessor 2
Check the microprocessor.
166-250-000 System Management: Failed.
I2C cable is disconnected.
1. Check the I2C cable between the operator
information panel assembly and the system
board.
2. Check the system board.
166-400-000 System Management: Failed.
BMC self-test failed.
1. Reflash or update firmware to the latest
level.
2. Check the system board.
166-404-001 System Management: Failed.
BMC indicates failure in I2C bus
test.
1. Disconnect all power cords and external
cables from the device, wait 30 seconds,
reconnect, and retry.
2. Reflash or update firmware to the latest
level.
3. Reseat the power backplane.
4. Check the system board.
166-406-001 System Management: Failed.
BMC indicates failure in I2C bus
test.
1. Disconnect all power cords and external
cables from the device, wait 30 seconds,
reconnect, and retry.
2. Reflash or update firmware to the latest
level.
3. Reseat the hard disk drive signal cable and
backplane.
4. Check the system board.
Table 6-9 Error Code Definitions (continued)
Error Code Problem Action