Cisco WAE-674-K9 - Wide Area Application Engine 674 Installation Manual
Download Hardware installation manual of Cisco WAE-674-K9 - Wide Area Application Engine 674 Adapter, Network Card for Free or View it Online on All-Guides.com.
Brand: Cisco
Category: Adapter , Network Card
Type: Hardware installation manual for Cisco WAE-674-K9 - Wide Area Application Engine 674
Pages: 152 (4.9 Mb)
Download Cisco WAE-674-K9 - Wide Area Application Engine 674 Hardware installation manual
4-9
Cisco Wide Area Application Engine 7341, 7371, and 674 Hardware Installation Guide
OL-15012-02
Chapter 4 Installing Hardware Options for the WAE-7371, WAE-7341, and WAE-674
Installing Memory in a WAE-674
Caution Do not leave open spaces above or below an installed device in the rack cabinet.
To help prevent damage to device components, always install a blank filler panel
to cover the open space and to help ensure proper air circulation. See the
documentation that comes with your rack cabinet for more information.
Step 3 Connect the cables and power cords. For information on connecting cables and
power cords, see the
“Connecting Cables” section on page 3-11.
Installing Memory in a WAE-674
The WAE-674 features 4 GB of RAM. You can install an additional 4 GB of RAM
to give your WAE-674 a total of 8
GB of RAM. This section describes how to
install the optional 4
GB memory upgrade, which includes two 2-GB DIMMs.
To install additional memory in your WAE-674, follow these steps:
Step 1 Review the information in the “Safety Warnings” section on page 2-1 and the
“Safety Guidelines” section on page 2-4.
Step 2 Power off the device and all attached devices and disconnect all external cables
and power cords.
Step 3 Remove the device top cover. See the “Removing the Cover” section on page 4-1.
Step 4 Remove the riser-card assembly as shown in Figure 4-6.