Cisco WUSB54GS Quick Installation Manual
Download Quick installation manual of Cisco WUSB54GS Adapter for Free or View it Online on All-Guides.com.
Brand: Cisco
Category: Adapter
Type: Quick installation manual for Cisco WUSB54GS
Pages: 2 (0.23 Mb)
1
2
A Division of Cisco Systems, Inc.
®
Model No.
Quick Installation
Model No.
Wireless
12
The USB Network Adapter is installed
and set up using the Setup Wizard
that comes on the CD enclosed.
A To begin, insert the Setup
Wizard CD-ROM into your CD-
ROM drive. The Setup Wizard
should run automatically, and
the Welcome screen should
appear.
B To install the Adapter, click
Click Here to Start on the
Welcome screen.
C After reading the License
Agreement, click Next to
continue the installation and
Windows will begin copying the
files onto your PC.
D The Setup Wizard will now
prompt you to connect the
Adapter to your PC’s USB port.
Proceed to Step 2.
Now that the Setup Wizard has
prompted you to connect the
Adapter, follow the instructions
below.
A Connect one end of the
included USB cable to the
Adapter’s USB port
B Connect the other end of the
cable to one of the USB ports
on your computer.
C The Power LED should light up
when the Adapter is plugged
in.
D Raise the antenna. Make sure
the antenna points straight up
into the air, at a 90º angle from
the Adapter. This will ensure
optimum wireless operating
range and performance.
Once the Adapter is connected,
click Next on the Connecting the
Adapter screen to proceed.
Proceed to Step 3.
Package Contents
• Wireless-G USB Network Adapter with
SpeedBooster
• One Setup CD-ROM
• One User Guide on CD-ROM
• USB Cable
• Quick Installation Guide
Connect the Adapter
Begin Installation
WUSB54GS
USB Network Adapter
Wireless-G
with SpeedBooster
A
C
The Adapter’s
Connecting
How to Connect
USB Port
the Adapter
IMPORTANT: Do not connect the Adapter to Your PC
until you are instructed to do so in Step 2 or the
Adapter will not install propertly.
GHz
2.4
802.11g