ADC WFX-3100-M-1 Quick Installation Manual
Download Quick installation manual of ADC WFX-3100-M-1 Power Supply for Free or View it Online on All-Guides.com.
Brand: ADC
Category: Power Supply
Type: Quick installation manual
Model: ADC WFX-3100-M-1 , ADC WFX-3100-C-1
Pages: 4
WFX-3100 Remote DC Power System
Quick Installation Guide
Page 1 of 4
OVERVIEW
This Quick Installation Guide addresses the optional Remote DC
Power System (WFX-3100), and includes product specifications
and installation instructions.
The ADC family of products includes the following items:
• ADC Wireless LAN Array (WFX-3900/3700/3500) – ADC offers
multiple versions of the Wireless LAN Array to support a variety
of deployment types and client migration strategies. Each
Wireless LAN Array includes an embedded Array Controller and
comes in 16 (WFX-3900), 8 (WFX-3700), and 4 (WFX-3500)
Integrated Access Point configurations.
• ADC Centralized Management Platform (WFX-3300) – The
optional WFX-3300 can discover, authenticate and configure up
to 500 Wireless LAN Arrays from anywhere in the network.
• ADC Remote DC Power System (WFX-3100) – The optional
WFX-3100 provides a 48 volt DC power source for remotely
powering up to 12 DC-compatible Wireless LAN Arrays (for
example, WFX-3900-DC) in the event AC power is unavailable
or is cost prohibitive to deploy. The DC-compatible Wireless LAN
Array has a Buchanan socket located next to the ON/OFF
switch.
Features
• Distributes 48V DC power for up to 12 Wireless LAN Arrays.
• Uses standard CAT-5 data-grade cable.
• Needs only 2 cables (1 data and 1 power) per Wireless LAN
deployment.
• Supports up to 3 Power (Expansion) Modules, providing
maximum flexibility during Wi-Fi rollouts.
• When used with a UPS, the WFX-3100 grants all Wireless LAN
Arrays immunity to power outages.
• Fits into existing wiring closets and uses minimal rack space.
SPECIFICATIONS
Table 1 provides product specifications for the WFX-3100 Chassis
(WFX-3100-C) and the WFX-3100 Expansion (Power) Module
(WFX-3100-M).
Table 1. WFX-3100 Specifications
PRE-INSTALLATION
Locate Required Equipment
To complete the following procedure, you will need the following:
• WFX-3100 unit
• Power module
• Rack mounting brackets (x2)
• 3/16 inch allen key (for installing the power module)
• Cross-head screwdriver (for attaching the mounting brackets to
the WFX-3100)
INSTALLATION
Attach the Mounting Brackets
Figure 1. Attach the Mounting Brackets
Element
Specifications for
WFX-3100-C
Specifications for
WFX-3100-M
Number of WLAN
Arrays supported
• Base configuration
supports up to 4
WLAN Arrays
• With one additional
Expansion Module
(WFX-3100-M),
supports up to 8
WLAN Arrays
• With two additional
Expansion Modules
(WFX-3100-M),
supports up to 12
WLAN Arrays
4 per Expansion Module
Physical
• 19 inch rack-
mountable 1U chassis
• Height: 1.72 inches
(43.7 mm)
• Width: 17.19 inches
(437 mm)
• Depth: 13.25 inches
(336 mm)
• Weight: 10 lbs.
(4.53 kg)*
*12.75 lbs. [5.78 kg] with
one additional Expansion
Module, and 15.5 lbs.
(7.03 kg) with two
additional Expansion
Modules.
• Height: 1.6 inches
(41 mm)
• Width: 5 inches
(127 mm)
• Depth: 10.16 inches
(258 mm)
• Weight: 2.75 lbs
(1.25 kg)
Input voltage
• Up to 3 at 85-264 VAC
(4.7 amp each)
• Input connector:
IEC60320 C14
• Up to 3 at 85-264 VAC
(4.7 amp each)
• Input connector:
IEC60320 C14
Output current
• 48 VDC, 2 amp per
output connector
• Output connector:
TYCO AMP 796634-3
• 48 VDC, 2 amp per
output connector
• Output connector:
TYCO AMP 796634-3
LED indicators
• AC power
•DC status
• AC power
• DC status
Operating
temperature range
• 0°C to 70°C ambient
• 0% to 90% humidity
(non-condensing)
• 0°C to 70°C ambient
• 0% to 90% humidity
(non-condensing)
Storage
temperature range
• -40°C to 85°C ambient
• 0% to 90% humidity
(non-condensing)
• -40°C to 85°C ambient
• 0% to 90% humidity
(non-condensing)
Step Action
1
Using the countersunk screws provided, attach the
2 rack mounting brackets—one at each side of the unit
(see Figure 1). Tighten all four screws to 10–12 lbf-ft
(1.38–1.66 kg./m.)—do not overtighten!!