COOK CHILL SYSTEMS
Cook/Chill Systems
SECT. XIV PAGE 47
0907
AIR AGITATED
ICE BUILDER
MODELS: IBC-50 IBC-150 IBC-250 IBC-450
IBC-75 IBC-175 IBC-300 IBC-500
IBC-100 IBC-200 IBC-350 IBC-600
IBC-125 IBC-225 IBC-400 IBC-1000
Cleveland Standard Features
I Direct expansion ice builder, with externally equalizing
thermostatic expansion valves.
I For operation with R-22, 404A or R507 refrigerant
(please specify).
I Liquid and suction headers are provided with single point
connections to the condensing unit.
I Coils are factory pressure tested, dried using a deep
vacuum, and filled with dry nitrogen at atmospheric
pressure for shipping.
I For fast, even temperature distribution the water return is
located on the rear of the tank and the chilled water outlet on
the front.
I Tank is constructed of 1/4" steel plate with angle stiffeners,
and all seams are double welded.
I 2" thick insulation between double plated tank bottom.
I Tank sides and ends have a 3" polystyrene insulation
between the tank wall and the outer sheathing of stucco
embossed aluminum.
I Interior of the tank is coated with a zinc dust primer.
I Standard top 2" insulated covers are sectional, overlapping,
and self-draining.
I Air blower with removable air distribution pipes, located
between each vertical bank of ice coils, for even ice
build-up and melting.
I Automatic ice bank control with temperature and
conductivity sensors. Indicates low ice condition.
I Waterproof control box mounted to outside of tank.
I Automatic water level control furnished with 3/4" water
solenoid valve.
I Available in sizes for up to 100,000 lbs. capacity.
I Accepted for use in U.S.D.A. Inspected Facilities
Options & Accessories
Ë Ice water control panel for location in production area (model
IW-CP).
Ë Condensing units for indoor or outdoor installation, air or
water cooled (specify).
Ë Water circulating pumps (must be sized by mechanical engi-
neer).
Ë Pump package stand with premounted water circulation
pump and air blower, complete with motor starters.
Ë Stainless steel evaporator coils.
Ë All stainless steel ice builder.
Shall be Cleveland Model IBC-____; ____,000 lbs., capacity
air agitated ICE BUILDER for direct expansion operation;
thermostatic expansion valves; liquid and suction headers
are provided with single point connections to condensing
unit. The coils are factory tested, dried using a deep vacu-
um. Unit includes: Automatic water level control, insulated
covers, ice bank control, liquid line solenoid and air agita-
tion package. Tank is constructed of 1/4" steel plate with
angle stiffeners, 3" polystyrene insulation on sides and
ends, 2" thick insulation on bottom. The exterior is covered
by stucco embossed aluminum panels.
Short Form Specifications
