Juniper QFX5100 Hardware Manual
Download Hardware manual of Juniper QFX5100 Network Router, Switch for Free or View it Online on All-Guides.com.
Brand: Juniper
Category: Network Router , Switch
Type: Hardware manual for Juniper QFX5100
Pages: 300
Connecting Earth Ground to a QFX5100 Device
To meet safety and electromagnetic interference (EMI) requirements and to ensure
proper operation, you must connect the QFX5100 device to earth ground before you
connect it to power.
For installations that require a separate grounding conductor to the chassis, you must
attach a protective earthing terminal bracket on the QFX5100 device left front mounting
bracket to connect to the earth ground (see Figure 54 on page 171).
Before you connect earth groundto the protective earthingterminal of a QFX5100 device,
ensure that a licensed electrician has attached an appropriate grounding lug to the
grounding cable.
CAUTION: Using a grounding cable with an incorrectly attached lug can
damage the switch.
NOTE: Mountyour switchin therackor cabinet beforeattaching thegrounding
lug to the switch. See “Mounting a QFX5100 Device in a Rack or Cabinet” on
page 160.
Ensure that you have the following parts and tools available:
•
Protective earthing terminal bracket—This bracket attaches to the QFX5100 switch
chassis through the left front mounting bracket, providing a protective earthing terminal
for the switch.
•
Grounding cable for your QFX5100 device—The grounding cable must be 14 AWG
(2 mm²), minimum 90° C wire, or as permitted by the local code.
•
Grounding lug for your grounding cable—The grounding lug required is a Panduit
LCD10-10A-L or equivalent.
•
Two SAE 10-32 washers and screws—To attach the grounding lug to the protective
earthing terminal.
•
Screwdriver to attach the screws.
An AC-powered QFX5100 switch chassis gains additional grounding when you plug the
power supply in the switch into a grounded AC power outlet by using an AC power cord
appropriate for your geographical location. See “AC Power Cord Specifications for a QFX
Series Device” on page 80.
To connect earth ground to a QFX5100 device:
1. Attach one end of the grounding cable to an appropriate earth ground site, such as
the mounting rack.
2. Position the grounding lug over the protective earthing terminal on the side of the
Copyright © 2016, Juniper Networks, Inc.170
QFX5100 Switch Hardware Guide