Juniper QFX5100 Hardware Manual
Download Hardware manual of Juniper QFX5100 Network Router, Switch for Free or View it Online on All-Guides.com.
Brand: Juniper
Category: Network Router , Switch
Type: Hardware manual for Juniper QFX5100
Pages: 300
•
Retrieve the original shipping carton and packing materials. Contact your JTAC
representative if you do not have these materials, to learn about approved packing
materials. See “Contacting CustomerSupport to Obtain a Return Materials Authorization
for a QFX Series Device or Component” on page 228.
Ensure that you have the following parts and tools available:
•
ESD grounding strap.
•
Antistatic bag, one for each component.
•
If you are returning the chassis, an appropriate screwdriver for the mounting screws
used on your rack or cabinet.
This topic describes:
•
Packing a QFX5100 Switch for Shipping on page 227
•
Packing QFX5100 Switch Components for Shipping on page 227
Packing a QFX5100 Switch for Shipping
To pack a QFX5100 switch for shipping:
1. Power down the switch and remove the power cables. See “Powering Off a QFX5100
Device” on page 193.
2. Remove the cables that connect the QFX5100 switch to all external devices.
3. Remove all field-replaceable units (FRUs) from the switch.
4. Have one person support the weight of the switch while another person unscrews
and removes the mounting screws.
5. Remove the switch from the rack or cabinet (see “Chassis Lifting Guidelines for a
QFX5100 Device” on page 249) and place the switch in an antistatic bag.
6. Place the switch in the shipping carton.
7. Place the packing foam on top of and around the switch.
8. If you are returning accessories or FRUs with the switch, pack them as instructed in
“Packing QFX5100 Switch Components for Shipping” on page 227.
9. Replace the accessory box on top of the packing foam.
10. Close the top of the cardboard shipping box and seal it with packing tape.
11. Write the RMA number on the exterior of the box to ensure proper tracking.
Packing QFX5100 Switch Components for Shipping
CAUTION: Do not stack switch components. Return individual components
in separate boxes if they do not fit together on one level in the shipping box.
To pack and ship QFX5100 switch components:
227Copyright © 2016, Juniper Networks, Inc.
Chapter 21: Contacting Customer Support and Returning the Chassis or Components