Juniper QFX5100 Hardware Manual
Download Hardware manual of Juniper QFX5100 Network Router, Switch for Free or View it Online on All-Guides.com.
Brand: Juniper
Category: Network Router , Switch
Type: Hardware manual for Juniper QFX5100
Pages: 300
Figure 39: Clearance Requirements for Airflow and Hardware Maintenance
for a QFX5100 Device
FRUs
Ports
Mounting bracket
17.36"
44.1 cm
20.48"
(52.02 cm)
Clearance required
for maintenance
Clearance required
for maintenance
g050277
19"
(48.2 cm)
24 " ( 60 .9 cm) 24 " ( 60 .9 cm)
•
For the cooling system to function properly, the airflow around the chassis must be
unrestricted. See “Cooling System and Airflow in a QFX5100 Device” on page 39 for
more information about the airflow through the chassis.
•
If you are mounting a QFX5100 device in a rack or cabinet with other equipment, ensure
that the exhaust from other equipment does not blow into the intake vents of the
chassis.
•
Leave atleast 24 in. (61 cm) both in front of and behind the QFX5100 device. For service
personnel to remove and install hardware components, you must leave adequate
space at the front and back of the switch. NEBS GR-63 recommends that you allow
at least 30 in. (76.2 cm) in front of the rack or cabinet and 24 in. (61 cm) behind the
rack or cabinet.
Related
Documentation
• Rack Requirements for a QFX5100 Device on page 74
• Cabinet Requirements for a QFX5100 Device on page 75
• General Site Guidelines on page 69
• Rack-Mounting and Cabinet-Mounting Warnings on page 251
77Copyright © 2016, Juniper Networks, Inc.
Chapter 6: Preparation Overview