Compaq 245161-B22 - 10642 42U Rack Shock Pallet Installation Instructions
Download Installation instructions of Compaq 245161-B22 - 10642 42U Rack Shock Pallet Carrying Case for Free or View it Online on All-Guides.com.
Brand: Compaq
Category: Carrying Case
Type: Installation instructions for Compaq 245161-B22 - 10642 42U Rack Shock Pallet
Pages: 4 (1.04 Mb)
Download Compaq 245161-B22 - 10642 42U Rack Shock Pallet Installation instructions
1
2
3
4
HP 110V/220V Light Rack
Option Kit
Installation Instructions
About this device
The HP 110V/220V Light Rack Option Kit enables you to add a
light to the rack.
Kit Contents
The items required for installation include:
• 110V/220V light unit (with cover)
• F14W/133-T8 fluorescent lamp
• Power cord (10 ft), C13-C14
• Screws
Required Tool
You will need a flat-head screwdriver.
Important Safety Information
Before installing this product, read the Important
Safety Information guide provided.
WARNING: To reduce the risk of personal injury, fire, or
damage to the equipment, do not overload the HP
110V/220V Light Rack Option Kit.
WARNING: The fluorescent lamp contains mercury.
Therefore, at end-of-life, the fluorescent lamp may require
special handling.
WARNING: To reduce the risk of personal injury or
damage to the equipment, be sure that:
• The leveling feet are extended to the floor.
• The full weight of the rack rests on the leveling feet.
• The stabilizing feet are attached to the rack if it is a
single-rack installation.
• The racks are coupled together in multiple-rack
installations.
• Only one component is extended at a time. A rack
may become unstable if more than one component is
extended for any reason.
Installing the HP 110V/220V
Light Rack Option Kit
1. Remove the fluorescent lamp cover.
2. Insert two screws, securing the HP 110V/220V Light Rack
Option Kit to the rack frame.
3. Insert the fluorescent lamp pins into the light socket (1) and
gently turn the fluorescent lamp toward the rack (2) until it
snaps into place.
4. Replace the fluorescent lamp cover.
Operating the HP 110V/220V
Light Rack Option Kit
Item Description Status
1 On Turns the light on.
2 Off Turns the light off.
3 Standby mode Turns the light on
when the rack
door is open and
turns the light off
when the rack
door is closed.
© Copyright 2004, 2007 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The
only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP shall
not be liable for technical or editorial errors or omissions contained herein.
Part Number 365456-002
August 2007 (Second Edition)