Compaq 234664-002 - ProLiant - ML330T02 Setup And Installation Manual
Download Setup and installation manual of Compaq 234664-002 - ProLiant - ML330T02 Desktop for Free or View it Online on All-Guides.com.
Brand: Compaq
Category: Desktop
Type: Setup and installation manual for Compaq 234664-002 - ProLiant - ML330T02
Pages: 160 (4.2 Mb)
Download Compaq 234664-002 - ProLiant - ML330T02 Setup and installation manual
4-12 Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 234833-001 File Name: e-ch4 Cabling Guidelines.doc Last Saved On: 5/22/01 2:42 PM
Cabling ATA Devices
The following steps detail the procedure for connecting cables from an
integrated ATA/100 controller to an internal ATA hard drive or other device:
1. Install the device. Refer to “Installing a Hard Drive” or “Installing a
Device into a Removable Media Bay,” in Chapter 3, “Hardware Options
Installation,” for instructions.
2. Make sure that the jumper on the drive is set to Cable Select (CS).
3. Install the next available cable connector to the hard drive or ATA
device. Figure 4-9 and Table 4-4 show the cabling configuration when
four ATA hard drives are installed. If fewer than four drives are
installed, then follow these cabling steps accordingly.
2
4
1
3
Figure 4-9. Cabling an ATA hard drive or other device
Table 4-4
ATA Cabling Sequence
Step Channel/Cable Cable Connector Drive Location
Primary Device 0 Hard drive bay 2
Secondary Device 0 Media bay 3
Primary Device 1 Hard drive bay 3
Secondary Device 1 Media bay 4
Note: Refer to Chapter 1, “Server Features,” for drive bay locations.