Philips 32PF7320/93 Quick Use Manual

Download Quick use manual of Philips 26PF5320 LCD TV for Free or View it Online on All-Guides.com. This version of Philips 26PF5320 Manual compatible with such list of devices, as: 26PF5320, 32PF5320, 32PF5320 - 5, 32PF7320 - 5, 32PF7320/93

Philips 26PF5320 Quick use manual - Page 1
1
Philips 26PF5320 Quick use manual - Page 2
2
Philips 26PF5320 Quick use manual - Page 3
3
Philips 26PF5320 Quick use manual - Page 4
4
PC-VGA
6
LISTING THE ACCESSORIES
First, assemble the LCD TV using the steps below:
Gently pull out the stand arm cover to locate all the sockets at the
bottom of the set.
1
Connect the aerial cable (not supplied) from the aerial
socketof the TV to the wall socket.
2
Connect the mains cord to the television power inlet and the
mains plug into the wall socket.
3
Press the POWER button at the side of the TV set to switch
to turn on the TV.
4
Press the VOLUME + button to increase the sound level or
the decrease the VOLUME - button to lower the sound level.
5
Press the PROGRAM + or - button to select the TV
programmes.
6
Press the MENU button to display the on-screen menu. Use
the VOLUME and PROGRAM buttons for selection and
adjustments in the on-screen menu.
PC (MONITOR) INPUTS
This TV can be used as a PC Monitor. Your computer will have to be equipped
with a VGA (or DVI type video output) and VGA cable (or a DVI to HDMI cable).
1
Connect one end of the VGA Video cable to the Monitor (video) output
on the computer to the PC-VGA/CVI-2 jack on the bottom of the TV.
OR
if your computer comes with DVI video output, you can use a DVI to
HDMI cable to connect from the computer’s DVI output to the HDMI/PC-
D input on the bottom of the TV.
2
The TV can reproduce the computer’s audio. Using a 3.5mm Stereo Plug
to 2 RCA Plugs “Y” Cable, connect the Stereo plug to the Audio output
jack on the computer (if available) while connecting the Left and Right RCA
plugs to the Audio In L and R (PC AUDIO IN) Input Jacks on the bottom of
the TV.
Note: If you are connecting the computer using a DVI to HDMI cable
and audio cable to the TV, you will need to press the ù button on the
remote control repeatedly until the the computer’s audio is reproduced.
3
Turn the TV and the computer ON.
4
Press the AV button on the remote control to show the Source List menu.
5
Press the œ button repeatedly until PC-VGA is highlighted if you have
connected the computer to the TV using a VGA cable;
OR
until PC-D is highlighted if you have connected the computer to the TV
using a DVI to HDMI cable.
6
Press the π button to enter the selected Mode.
CONNECTING PERIPHERAL EQUIPMENT TO THE LCD TELEVISION
AV OUTPUTS
There are Audio/Video output jacks located on bottom of the TV that can also
be used for extra accessory device connections for items such as an external
audio system, a video recorder or even an additional TV.
REAR/SVHS INPUTS
Much like the AV jacks, the REAR/SVHS jacks allow for extra accessory device
connections for items such as cameras or gaming stations. The REAR/SVHS Input
Jacks are located on the rear of the TV.
1
Connect the VIDEO (yellow) adapter cable to the VIDEO AV3 in jack on
the left rear of the TV. Connect the other end of the VIDEO (yellow) cable
to an RCA type VIDEO Cable. Connect that cable to the VIDEO OUTjack
on the back of the accessory device being used. Note: An S-Video cable can
be used in place of the yellow Video cable if your device is equiped with an
S-Video Output. S-Video provides better video playback.
2
Connect the AUDIO (red and white) adapter cable to an RCA type Audio
Cable. Connect the other ends of the AUDIO (red and white) cables to
the AUDIO (left and right) OUT jacks on the rear of the accessory device
being used.
3
Turn the accessory device and the TV ON.
4
Press the AV button on the remote control to show the Source List menu
on the TV screen.
5
Press the œ button repeatedly until REAR/SVHS is highlighted, then press
the π button to enter the selected Mode.
6
With the accessory device ON, press the PLAY button to activate the
playback on the television.
HEADPHONE CONNECTIONS
The Headphone jack can be used to connect to a headphone. If connected to a
headphone, there will be no sound from the TV speakers. The sound will come
from the audio system of the headphone.
1
Connect Headphone jack located on the right rear of the TV to your
headphone set.
2
Turn the TV and headphone ON. TV sound can be heard through the
headphone.
VGA
CABLE
3.5MM STEREO PLUG
TO 2 RCA PLUGS “Y”
AUDIO CABLE
HEADPHONE
CABLE
HEADPHONE
1
2
Jack Panel Bottom of TV
1
2
OR
REAR / SVHS
5
3
6
2
1
2
1
5
6
4
3
DVI to HDMI
CABLE
Jack Panel Bottom of TV
PC with DVI
OUTPUT
PC with VGA
OUTPUT
OR
3
PC-D
OR
1
Using an RCA type Audio Left and Right Cable, connect one end to the
left and right Audio In (or AUX) L & R jacks (red & white) on the external
audio system and the other ends to the Audio Out L & R jacks on the
bottom of the TV.
2
Turn the external audio system and the TV On. TV sound can be heard
through the audio system.
For External Audio System Connection:
2
1
AUDIO CABLES
(RED/WHITE)
To PC
AUDIO IN
ù
Rear of
audio system
(illustration is
for reference
only. Your audio
system’s jack
panel may be
labeled differently.
A
B
C
x 1
x 1
x 4
LCD TV STAND ASSEMBLY
4
TV mains cord (two-pin) x 1 Remote Control x 1
VGA socket (DB-15) to cinch x 1
1
BASIC LCD TV OPERATION
LCD TV
Quick Use Guide
Thank you for purchasing Philips LCD Television set. You are now the proud owner of
a LCD TV set which promises full value to you as a customer. This Quick Use Guide is
designed to help you to do the connections to install and operate your TV. We strongly
recommend you to read the instructions thoroughly.
26PF5320
32PF5320
32PF7320
1
2
4
5
4
5
3141 045 20061