Maytag M1200 Owner's Manual
Download Owner's manual of Maytag M1200 Iron, Vacuum Cleaner for Free or View it Online on All-Guides.com.
20
PRoBleM solVInG GUIDe
Troubleshooting
PROBLEM
Vacuum won’t turn on
Vacuum won’t pick up or
low suction
Dust escaping from vacuum
POSSIBLE REASON
• Power cord not rmly
plugged in.
• Blown fuse or tripped
breaker.
• Needs service.
• “Carpet” button not on.
• Vacuum bag is full.
• Clogged lter(s).
• Hose clogged.
• Worn brushes.
• Broken belt.
• Tool Activation Dial
turned “On”.
• Dust compartment cover
not attached properly.
• Filters not installed correctly.
POSSIBLE SOLUTION
• Plug unit in rmly.
• Check house fuse or
breaker. Replace fuse /
reset breaker.
• Take to an Authorized
Maytag Service Center.
• Press “Carpet” button on –
it will illuminate when
it’s on.
• Replace bag.
• Replace lter(s).
• Remove obstacle.
• Replace brush strips.
• Take to an Authorized.
Maytag Service Center.
• Turn Tool Activation Dial to
“Off” position for carpet or
bare oor cleaning.
• Attach the dust compartment
cover and secure latch.
• Review lter installation
(page 15-17).
Any other service should be done by an Authorized Maytag Vacuum Service Center.
To locate your nearest service center, visit our website at www.MaytagVacuums.com.
For telephone customer support please call 1-855-653-1114.
For Best Performance
• Keep your vacuum clean and in good operating condition.
• Change vacuum bags once a month or when the full bag light is illuminated to maximize cleaning
performance.
• Always use genuine Maytag™ vacuum bags and replacement parts. Use of other products may
result in poor cleaning performance, potential vacuum cleaner damage and may void vacuum
warranty. Genuine products are designed for maximum cleaning performance.
• Have your vacuum checked annually by your Authorized Maytag Service Center.
• Store your vacuum carefully in a dry area.
• For optimum cleaning performance and safety, follow your owner’s manual instructions.
Key Replacement Parts
• Genuine HEPA Media Vacuum Bags: M12H-6
• Genuine Filter Set: M12F
CAUTION! To reduce the risk of injury from moving parts, unplug the vacuum before servicing.
CAUTION! To reduce the risk of electric shock, do not handle plug or appliance with wet hands.