Moxa Technologies Transio TCC-82 User Manual

Download Operation & user’s manual of Moxa Technologies Transio TCC-82 Media Converter for Free or View it Online on All-Guides.com.

Moxa Technologies Transio TCC-82 Operation & user’s manual - Page 1
1
Moxa Technologies Transio TCC-82 Operation & user’s manual - Page 2
2
Serial Port Powered Media Conversion Solution
Transio TCC-82 User’s Manual P/N: 1802000820011 Third Edition.
www.moxa.com ©2008 Moxa Inc.
Moxa Inc.
All rights reserved.
RS-232 Pinouts
The female DB9 port and RS-232 pinouts for the
port are shown below.
5 4 3 21
9
68 7
PIN RS-232
1 DCD
2 TxD
3 RxD
4 DSR
5 GND
6 DTR
7 CTS
8 RTS
The male DB9 port and RS-232 pinouts for the port
are shown below.
12345
6789
PIN RS-232
1 DCD
2 RxD
3 TxD
4 DTR
5 GND
6 DSR
7 RTS
8 CTS
Note: The DTR, DSR and DCD pins are shorted
as shown above so that users do not need
to worry about signal control cable wiring.
Transio TCC-82 V2.0
4-channel, self-powered RS-232 signal isolator
(4KV RMS for 1 min. isolation) with 15 KV ESD
protection
Overview
The TCC-82 is a signal isolator that provides
bi-directional serial communication with full
electrical isolation between two RS-232 devices.
This compact isolator isolates both sides of the
connection, providing perfect protection from
ground loops, lightning surge coupling, and
accidental high voltage shorts. The internal
magnetic coupler is tested to ensure that it can
withstand more than 4 KV rms input-to-output for 1
minute. This guarantees that the TCC-82 not only
meets the requirements of general serial data
communications, but also the high standards
required by industrial automation and medical
applications. In addition to the TxD and RxD data
lines, the TCC-82 also protects the RTS/CTS
handshake lines on its two D-type connectors.
Package Checklist
TCC-82 RS-232 Signal Isolator
2 USB Power Cords
User’s Manual
Applications
Medical facilities
Terminal connections
Factory automation
Remote serial device control
Building security automation
Critical industrial control
Surveillance systems
Features and Specifications
Serial interface: RS-232
Serial port type: DB9 (1 male, 1 female)
Compact size
Auto senses baud rates up to 115.2 Kbps
Signals:
RS-232 Isolation: TxD, RxD, RTS and CTS;
RS-232 loop back: DTR to DSR and DCD
15 KV ESD protection for all RS-232 signals
Serial Power Source: TxD, RTS, or DTR
External Power (jack connector): DC +5V to
+12V adaptors or by USB power cords.
Operating temperature: 0 to 60°C (32 to 140°F)
Dimensions: 42 x 80 x 23.6 mm
Casing: ABS + PC
Weight: 60 ± 5g
CE, FCC Class B approval
Power Consumption: 10 mA at +5 VDC
Warranty: 5 years
shorted
shorted