Cornelius CCM322/522 Installation Instructions

Download Installation instructions of Cornelius CCM322/522 Beverage Dispenser for Free or View it Online on All-Guides.com.

Brand: Cornelius

Category: Beverage Dispenser

Type: Installation instructions

Model: Cornelius CCM322/522 , Cornelius ED/DF300

Pages: 4 (1.34 Mb)

Download Cornelius CCM322/522 Installation instructions

Cornelius CCM322/522 Installation instructions - Page 1
1
Cornelius CCM322/522 Installation instructions - Page 2
2
Cornelius CCM322/522 Installation instructions - Page 3
3
Cornelius CCM322/522 Installation instructions - Page 4
4
ED/DF300 22” CCM322/522 Nordic Style Lid Kit Installation Instructions
© 2007-2010, IMI Cornelius Inc. - 1 - Publication Number: 620204725INS
INSTALLATION INSTRUCTIONS
ED/DF300 22” CCM322/522 NORDIC BLACK/GRAY STYLE LID KITS
This Nordic style kit applies to the Cornelius 22” wide CCM322/522 ice maker.
!
WARNING:
Disconnect power to the unit before installing the adaptor following all lockout/tag out procedures established by the
user. Verify that all the power is off to the unit before performing any work.
Failure to comply could result in serious injury, death or damage to the equipment.
!
WARNING:
All ice baffle plates and bin stats, if included or recommended in this kit, must be installed as directed in this manual or
the equipment manufacturer’s instructions.
Failure to comply could result in serious injury, death or damage to the equipment.
!
WARNING:
All of the attachment screws and plates must be installed as directed in this manual.
Failure to comply could result in serious injury, death or damage to the equipment.
!
WARNING:
The dispenser must be secured with 3/8-16 bolts (6) to the counter before installing this Icemaker Adapter Kit. Refer
to the installation manual and Figure 3 for the counter mounting template.
NOTE: Adjust the automatic agitation timer located in the dispenser’s electrical control box to 5 sec-
onds on, 20 minutes off. Access to the timer is provided by removing the merchandiser/upper
front panel.
1. Remove the (2) screws from each side of the dispenser cabinet. and the plastic hopper covers (2) that
were shipped with the unit.
2. Place the “K” style lid on the unit and use the (4) screws that were removed to fasten the lid in place.
3. Install the ice baffle on the lid assembly as shown in Figure 2.
IMPORTANT: The baffle prevents ice from overfilling the manual fill area during agitation/
dispensing with a full storage bin and forcing the manual fill cover off.
Table 1. Shipped Loose Parts
Item No. Part No. Name Qty.
1 15210 Lid Assembly 1
2 22127 Icemaker Mounting Bracket 2
3 50904 RTV. 3Oz Tube 1
4
52946
52964
Manual Ice Fill Cover, Black
Manual Ice Fill Cover, Gray
1
5 91957 Label, “Disconnect Power Before Cleaning” 1
6 620042919 ED300 Ice Baffle 1
7 620701601 #10 x 1/2” LG. Sheetmetal Screw 8
8 620701902 #8–32 Nylon Acorn Nut 4
9 620701901 Sealing Washer 4
10 621701903 #8 Nylon Washer 4
11 620204725INS Installation Instructions 1
13 630500109 Bin Stat 1
Release Date: October 29, 2010 www.cornelius.com Revision: B