Cornelius Flavor Fusion 620701601 Installation Instructions

Download Installation instructions of Cornelius Flavor Fusion 620701601 Ice Maker for Free or View it Online on All-Guides.com. This version of Cornelius Flavor Fusion 620701601 Manual compatible with such list of devices, as: Flavor Fusion 620701601, Nordic 620046139, Nordic 620050521, Nordic CCM1530, Nordic DF2XX 30"

Cornelius Flavor Fusion 620701601 Installation instructions - Page 1
1
Cornelius Flavor Fusion 620701601 Installation instructions - Page 2
2
Cornelius Flavor Fusion 620701601 Installation instructions - Page 3
3
ED/DF2XX 30” CCM1530 Nordic Style Lid Kit Installation Instructions
© 2007-2010, IMI Cornelius Inc. - 1 - Publication Number: 620204719INS
INSTALLATION INSTRUCTIONS
FOR
ED/DF300 30” CCM1530 NORDIC SS STYLE LID KIT
This Nordic style kit applies to the Cornelius 30” Wide CCM1530 Nordic Ice Maker.
!
WARNING:
Disconnect power to the unit before installing the adaptor following all lockout/tag out procedures established by the
user. Verify that all the power is off to the unit before performing any work.
Failure to comply could result in serious injury, death or damage to the equipment.
!
WARNING:
All ice baffle plates and bin stats, if included or recommended in this kit, must be installed as directed in this manual or
the equipment manufacturer’s instructions.
Failure to comply could result in serious injury, death or damage to the equipment.
!
WARNING:
All of the attachment screws and plates must be installed as directed in this manual.
Failure to comply could result in serious injury, death or damage to the equipment.
!
WARNING:
The dispenser must be secured with 3/8 X16 bolts (6) to the counter before installing the ice maker adapter kit. Refer
to the installation manual for the counter mounting template.
1. Position the ice maker adapter lid (item 1), flush with the rear of the cabinet, on the dispenser.
2. Seal the ice maker base to the adapter lid as follows:
A. Locate the ice maker two inches from the rear and flush with the sides of the lid. Run a bead of RTV
inside the perimeter of the ice maker base so that the base sets on the RTV.
B. Set the ice maker onto the lid. Note: if installing the ice maker from the front of the dispenser, use a
piece of 1” PVC pipe or larger as a “roller” to slide the ice maker over the front mounting bracket of the
manual fill cover.
C. Wipe away any excess RTV.
3. With the ice maker installed on top of the adapter lid, drill 0.147 diameter holes (#26 drill) into the dispenser cabi-
net using the slotted holes in the side flanges of the lid as templates. Be careful not to drill into the ice storage
hopper. Use of a drill stop (1/4 in.) is recommended. Secure the lid to the cabinet with (4) #10 sheet metal screws
(item 6).
Table 1: Loose Shipped Parts
Item No. Part No. Name Qty.
1
620046139 Ice Maker Adapter Lid 1
2
620050521 Manual Fill Cover 1
3
620051215 Ice Maker Mounting Bracket 2
5
50904 RTV Sealant 3oz. Tube 1
6
602701601 #10 X 1/2” Sheet Metal Screw 8
7
620204719 I N S Installation Instructions 1
8
630500109 Bin Stat 1
Release Date: October 27, 2010 www.cornelius.com Revision: B