Maytag cme9010cae Installation Instructions Manual

Download Installation instructions manual of Maytag cme9010cae Microwave Oven for Free or View it Online on All-Guides.com.

Brand: Maytag

Category: Microwave Oven

Type: Installation instructions manual for Maytag cme9010cae

Pages: 17

Download Maytag cme9010cae Installation instructions manual

Maytag cme9010cae Installation instructions manual - Page 1
1
Maytag cme9010cae Installation instructions manual - Page 2
2
Maytag cme9010cae Installation instructions manual - Page 3
3
Maytag cme9010cae Installation instructions manual - Page 4
4
Maytag cme9010cae Installation instructions manual - Page 5
5
Maytag cme9010cae Installation instructions manual - Page 6
6
Maytag cme9010cae Installation instructions manual - Page 7
7
Maytag cme9010cae Installation instructions manual - Page 8
8
Maytag cme9010cae Installation instructions manual - Page 9
9
Maytag cme9010cae Installation instructions manual - Page 10
10
Maytag cme9010cae Installation instructions manual - Page 11
11
Maytag cme9010cae Installation instructions manual - Page 12
12
Maytag cme9010cae Installation instructions manual - Page 13
13
Maytag cme9010cae Installation instructions manual - Page 14
14
Maytag cme9010cae Installation instructions manual - Page 15
15
Maytag cme9010cae Installation instructions manual - Page 16
16
Maytag cme9010cae Installation instructions manual - Page 17
17
C, ,0 0, e ice ,M,4YT--.4G
240EdwardsS[reet,SE
ClevelandTennessee373il
Tei:423-472-3333
Fax:423-478-6710
STEP 7
INSTALLATION
FOR EASIER INSTALLATION AND PERSONAL SAFETY, IT IS RECOMMENDED THAT TWO PEOPLE
INSTALL THIS PRODUCT.
1. Mount the rear mounting plate on the wall with at least one wood screws in a stud, 2 toggle bolt assemblies
into drywall. (For rear exhaust square up the exhaust adaptor and reinstall damper. Connect exhaust adaptor
to wall cap or to house exhaust pipe and reinstall). See Figure 10.
Insert toggle bolts (Hardware Item 2) through corresponding hole sin the rear mounting plate and add toggle
nut assemblies. Lift the rear mounting plate into place and insert toggle bolt assemblies through drywall holes.
See Figure 17. Screw wood screws (Hardware Item 1) into studs first. Then tighten toggle bolts.
i __ SPACE MORE THAN
---- WALL THICKNESS
MOUNTING
PLATE.I_,\ t._ _"" __
FIG. 17 WALL
2. Thread power cord through the hole, or slot, at the bottom of the top cabinet. Keep cord tight throughout
Step 3.
3. Remove the grease filters from the oven bottom. Install the unit by sliding over the rail of the rear
mounting plate. Push the unit all the way to the wall. Be sure to keep power cord tight. See Figure 18.
4. Insert 3 selected screws with flat washer (Hardware Item 3 and 4) through top cabinet bottom holes and
tighten to top of the unit. See Figure 19. (While tightening screws, lift front side of the unit and push toward
wall).
FIG.19
"C
MAYrAG Admtl'al fJ _"W_JENN -A_. "_"_,IgChet