Maytag MTUC7500ADH0 Use & Care Manual

Download Use & care manual of Maytag MTUC7500ADE0 Garbage Disposal for Free or View it Online on All-Guides.com.

Maytag MTUC7500ADE0 Use & care manual - Page 1
1
Maytag MTUC7500ADE0 Use & care manual - Page 2
2
Maytag MTUC7500ADE0 Use & care manual - Page 3
3
Maytag MTUC7500ADE0 Use & care manual - Page 4
4
Maytag MTUC7500ADE0 Use & care manual - Page 5
5
Maytag MTUC7500ADE0 Use & care manual - Page 6
6
Maytag MTUC7500ADE0 Use & care manual - Page 7
7
Maytag MTUC7500ADE0 Use & care manual - Page 8
8
Maytag MTUC7500ADE0 Use & care manual - Page 9
9
Maytag MTUC7500ADE0 Use & care manual - Page 10
10
Maytag MTUC7500ADE0 Use & care manual - Page 11
11
Maytag MTUC7500ADE0 Use & care manual - Page 12
12
Maytag MTUC7500ADE0 Use & care manual - Page 13
13
Maytag MTUC7500ADE0 Use & care manual - Page 14
14
Maytag MTUC7500ADE0 Use & care manual - Page 15
15
Maytag MTUC7500ADE0 Use & care manual - Page 16
16
Installation
1. Remove the mounting screws attaching the foot pedal to the
compactor. Remove foot pedal.
Custom Panel without Handle
Dimensions
Use these dimension drawings to create a custom panel for use
without a trim kit. The panel should be 1/2"(1.3 cm) min. thick.
B
A. Mounting screws
B. Foot pedal
2. Remove mounting screws attaching the toe guard to the
compactor. Remove toe guard.
3. Remove the mounting screws attaching the decorative panel
to the compactor. Remove decorative panel and discard
mounting screws.
4. Align the bottom of the custom panel with the bottom of the
drawer front.
5. Secure the panel from the back using four #8 x 1" wood
screws as shown.
6. Reinstall the toe guard using the existing screws and 1/2"
washer. Then, reinstall the foot pedal.
A
C
A. Handle
B. Custom panel
C. Panel screw locations
D. Toe guard
E. Washer
F. Toe guard screw
25"
(63.5 crn)
* J
Installation
1. Remove the mounting screws attaching the foot pedal to the
compactor. Remove foot pedal.
B
A. Mounting screws
B. Foot pedal
2. Remove mounting screws attaching the toe guard to the
compactor. Remove toe guard.
3. Remove the mounting screws attaching the decorative panel
to the compactor. Remove decorative panel and discard
mounting screws.
4. Align the bottom of the custom panel with the bottom of the
drawer front.
5. Secure the panel from the back using 4 - #8 x 1" wood
screws as shown.
8