• Home
• Brands
• Winterhalter Manuals
• Winterhalter UC series
• Winterhalter UC-S Operating Instructions Manual

Winterhalter UC-S Operating Instructions Manual

Download Operating instructions manual of Winterhalter UC series Dishwasher, Industrial Equipment for Free or View it Online on All-Guides.com. This version of Winterhalter UC series Manual compatible with such list of devices, as: UC series, UC-L, UC-M, UC-S, UC-XL

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

Electrical connection

43

20.1 Mains connection cable

Gefahr

DANGER! Risk of fatal injury due to live components!

The connecting cable may only be changed or replaced by the manufacturer, its

customer service representative or a similarly qualified person. Use an H07 RN-F type

cable or equivalent.

The machines of the UC series are delivered with or without mains connection cable.

Requirements to the mains connection cable

¾ Use a cable of the type H07 RN-F or equivalent

¾ Section and number of wires appropriate for voltage, fusing and overall connection value

Connection of the mains connection cable in the machine

Exemplary images for a UC-L

Remove the front cladding

UC-S: additionally remove the

right side cladding

Remove the bulkhead (1) towards the electric installation compartment

Insert the mains connection cable

through the backside of the ma-

chine and guide it to the connec-

tion terminals at the front

Strain relief

UC-M, UC-L, UC-XL

Tighten the screwed cable con-

nection in the electric installation

compartment

UC-S

Tighten the screwed cable con-

nection at the backside of the

machine

Connect the mains connection

cable to the terminals PE to N

according to the connection

scheme.

Observe the connection scheme

fixed at the bulkhead of the elec-

tric installation compartment.

Boiler heating element

The boiler heating element is already connected. However, jumpers must be plugged in, in order not to ex-

ceed the fusing values of the mains network.

¾ Please observe the connection scheme fixed at the bulkhead of the electric installation compartment.

20.2 Bonding connection

Integrate the machine and any plinths and table systems in the on-site equipotential bonding system. The

connection points are labelled accordingly.

There is a screw connection point marked with the earth symbol

at the back of the machine, to which the

earth lead must be connected.