Samsung CK95 Service Manual

Download Service manual of Samsung CK95 Microwave Oven for Free or View it Online on All-Guides.com. This version of Samsung CK95 Manual compatible with such list of devices, as: CK95, CK96T, CK97B, CK98F

Samsung CK95 Service manual - Page 1
1
Samsung CK95 Service manual - Page 2
2
Samsung CK95 Service manual - Page 3
3
Samsung CK95 Service manual - Page 4
4
Samsung CK95 Service manual - Page 5
5
Samsung CK95 Service manual - Page 6
6
Samsung CK95 Service manual - Page 7
7
Samsung CK95 Service manual - Page 8
8
Samsung CK95 Service manual - Page 9
9
Samsung CK95 Service manual - Page 10
10
Samsung CK95 Service manual - Page 11
11
Samsung CK95 Service manual - Page 12
12
Samsung CK95 Service manual - Page 13
13
Samsung CK95 Service manual - Page 14
14
Samsung CK95 Service manual - Page 15
15
Samsung CK95 Service manual - Page 16
16
Samsung CK95 Service manual - Page 17
17
Samsung CK95 Service manual - Page 18
18
Samsung CK95 Service manual - Page 19
19
Samsung CK95 Service manual - Page 20
20
Samsung CK95 Service manual - Page 21
21
Samsung CK95 Service manual - Page 22
22
Samsung CK95 Service manual - Page 23
23
Samsung CK95 Service manual - Page 24
24
Samsung CK95 Service manual - Page 25
25
4. Disassembly and Reassembly
4-1 Replacement of Magnetron, Motor Assembly and Lamp
Samsung Electronics 4-1
Remove the magnetron including the shield case,
permanent magnet, choke coils and capacitors (all
of which are contained in one assembly).
1. Disconnect all lead wires from the magnetron
and lamp.
2. Remove the bracket mounting.
3.Remove the magnetron supporter
4. Remove the air cover.
5. Remove screws securing the magnetron to the
wave guide.
6. Take out the magnetron very carefully.
7. Remove screws from the back panel.
8.Remove the assy noise filter.
9. Take out the fan motor.
10. Remove the oven lamp by pulling out from
hole of air cover carefully.
NOTE1: When removing the magnetron, make
sure that its antenna does not hit any
adjacent parts, or it may be damaged.
NOTE2: When replacing the magnetron, be sure
to remount the magnetron gasket in
the correct position and make sure the
gasket is in good condition.
1. Discharge the high voltage capacitor.
2. Disconnect all the leads.
3. Remove the mounting bolts.
4. Reconnect the leads correctly and firmly.
4-2 Replacement of High Voltage Transformer
Lamp
Cover Air
Magnetron
H. V. Trans
H. V. Capacitor
Screw
Thermo S/W
Fan Motor
H. V. Trans
Bolts