Samsung UN24H4000AF User Manual
Download Operation & user’s manual of Samsung 5003 Series Flat Panel TV, LCD TV for Free or View it Online on All-Guides.com. This version of Samsung 5003 Series Manual compatible with such list of devices, as: 5003 Series, Series 4000, CLP-310, UN48H4005AF, UN48H4005AF
Brand: Samsung , Samsung Electronics
Category: Flat Panel TV , LCD TV , LED TV , Monitor , Printer , TV
Type: Operation & user’s manual
Model: Samsung 5003 Series , Samsung Series 4000 , Samsung CLP-310 , Samsung UN24H4000AF , Samsung UN40H4005AF , Samsung UN48H4005AF , Samsung Electronics UN24H4000AF , Samsung Electronics UN40H4005AF , Samsung Electronics UN48H4005AF
Pages: 2
1
2
Air
If your TV is connected to an antenna choose Air, and then press
ENTER
E
. The TV will automatically start memorizing channels.
Cable
If your TV is connected to a cable outlet, choose Cable, and then
press ENTER
E
. Go to Step 3.
Auto
If you choose Auto, and then press ENTER
E
, the TV will
automatically select the correct Antenna source. Go to Step 3.
3. On the Cable Type screen, use the ◄/►/▲/▼
buttons to select
the type of digital and analog cable systems you have: STD, HRC,
or IRC. Most systems are STD (Standard). When done, select
Start, and then press ENTER
E
. The TV will start memorizing
channels.
✎ Channe l memorization can take up to 45 minutes, depe nding
on your cable system.
✎ Memorized channels are added to the Added Channels
list. These are the channels you will se e when you use the
Channe l buttons on your remote.
Clear Scrambled Channel
This function filters out scrambled channels after Auto Program is
completed. This process may take up to 20~30 minutes.
✎ Press the ENTER
E
button to stop the Clear Scrambled
Channel.
✎ This function is only available in Cable mode.
❑ Managing Channels
Channel List
See your list of Added channels, Favorite channels, or channels
you've scheduled for viewing. Add or delete Favorite channels, add
or delete channels from the Added Channels list, schedule channels
or programs for viewing. Watch a channel by selecting the channel
in the All Channels, Added Channels, or Favorite screen, pressing
the ▲ / ▼ buttons, and then pressing the ENTER
E
button.
Added Channels
6 Air
6-1 ♥ TV #6
7-1 ♥ TV #7
8 Air
9 Air
9-1 ♥ TV #9
10 Air
10-1 ♥ TV #10
11-1 ♥ TV #11
Air ' Zoom ' Select T Tools
Channel List Screens icons are listed on the left side. Select an
icon using the ▲/▼ buttons to view each list.
■
All Channels: Shows all currently available channels including
those you deleted from the Added Channels list.
■
Added Channels: Shows all Added Channels. These are the
channels that appear when you press the CH LIST button.
■ *
Favorite: Shows all favorite channels.
■
Programmed: Shows all channels and programs currently
scheduled using Timer Viewing.
✎ Remote control buttons ac tive on the Channel List screen.
x Green (Zoom): Enlarges or shrinks a channel number.
x Yel lo w (Select): Move the cu rsor to a chann el. Press the Yellow
button to select the cha nnel. A
c
mark ap pears. Repeat to select
additional channe ls. Then, ope n the Tools menu and a pply a
function to the channels you selected.
x
T
(To ols ): Displays the Channel List Tools menu. (The To ols
menus may differ depending on the situation.)
Display Icons Used in the Channel List Screens
Icons Meaning
c
A selected channel.
*
A Favorite channel.
)
A reserved program.
(
A program currently being broadcast.
❑ The Channel List Tools Menu
t
The Channel List Tools menu contains most of the functions you
can use on the
All Channel
,
Added Channels
, and
Favorite List
screens. To view, select a list screen, select a channel, and then
press the
TOOLS
button.
■
Add / Delete: Delete a channel from or add a channel to the
Added Channels list.
To delete channels from the Added Channels list, follow these steps:
1. Select one or more channels in the Added Channels list using
the ▲/▼ buttons and the Yellow Select button on your remote.
2. Press the TOOLS button on your remote. The Tools menu
appears.
3. Select Delete in the Tools menu, and then press the ENTER
E
button.
To add channels to the Added Channels list, follow these steps:
1. Select one or more channels in the All Channels list using the
▲/▼ buttons and the Yellow Select button on your remote.
2. Press the TOOLS button on your remote. The Tools menu
appears.
3. Select Add in the Tools menu, and then press the ENTER
E
button.
✎ All deleted channels will be shown on the All Channels list.
You add channels back to the Added Channels list on the
All Channels list.
✎ A gray-colored channe l indicates the channel has been
deleted f rom the Added Channels list.
✎ The Add menu o ption only appears for deleted channel s.
■
Add to Favorite/Delete from Favorite: Lets you add channels to
and delete channels from your Favorites list.
To add channels to the Favorites list, follow these steps:
1. Select one or more channels in the All Channels list using the
▲/▼ buttons and the Yellow Select button on your remote.
2. Press the TOOLS button on your remote. The Tools menu
appears.
3. Select Add to Favorite in the Tools menu, and then press the
ENTER
E
button.
To delete channels from the Favorites list, follow these steps:
1. Select one or more channels in the Favorite Channels list
using the ▲/▼ buttons and the Yellow Select button on your
remote.
2. Press the TOOLS button on your remote. The Tools menu
appears.
3. Select Delete from Favorite in the Tools menu, and then
press the ENTER
E
button.
■
Timer Viewing: You can schedule a channel to be displayed
automatically at a set time, even when you are watching another
channel. You must set the current time first in the Time > Clock
function to use Time Viewing.
To schedule a channel, follow these steps:
1. Select a channel in the Added Channels list using the ▲/▼
buttons and the Yellow Select button on your remote.
2. Press the TOOLS button on your remote. The Tools menu
appears.
3. Select Time Viewing in the Tools menu, and then press the
ENTER
E
button. The Time Viewing screen appears.
Antenna Channel Repeat
▲
DTV Air 6-1 Once
▼
L
Move
U
Adjust
E
Enter
R
Return
Timer Viewing
Date Start Time
01-01-2014 12 : 01 am
4. Use the ◄/► buttons to move from entry field to entry field
and the ▲/▼
buttons to change the entries. Where numbers
are displayed, you can also enter numbers directly using the
number keypad on your remote.
✎ If you sele ct Everyday or Every Week, the date you
select in the Date field b ecomes the start date for your
schedu led viewing. For Everyday, the TV will turn on
every day, at the time you selected, starting from that
date. For Ever yweek, the T V will turn on eve ry week,
on the same day of the week as the start date you
selected, at the time you selected, from that day on. If
you select Once, the TV will turn on once, on the date
and time you selected.
5. Press the ENTER
E
button on your remote when done.
✎ Only Added Channels can be scheduled.
✎ Scheduled programs and channels are displayed in the
Programmed List.
✎ When you select a digital channel, press the ► but ton to
view the di gital program list. If you highlight a program in
the list, and then press the ENTER
E
(Schedule) button,
you set Timer Viewing for that program directly.
■
Channel Name Edit: Analog channels only. Lets you assign a
name of up to five characters to an analog channel. For example,
Hist, Food, Golf, etc. This makes it easier to find and select a
channel.
■
Select All: Select all the channels in the displayed channel list.
■
Deselect All: Deselect all the selected displayed channels.
✎ You can only select Deselect All when one or more
channels are selected.
■
Auto Program: See Auto Program under Memorizing Channels.
Programmed List (on the Channel List Screen)
The Programmed list displays the channels and programs you
have scheduled for viewing using the Time Viewing function. You
can view, modify, or delete a show you have scheduled using the
functions on the Programmed List screen Tools menu.
Programmed List Screen Tools Menu
t
■
Change Info: Change the scheduling information for a show or
channel you have scheduled.
To change the information, follow these steps:
1. Select the Programmed List icon on the left side of the
Channel List screen, and then press the ENTER
E
button.
2. On the Programmed List screen, select the show or channel
entry you want to change, and then press the TOOLS button.
The Tools menu appears.
3. Select Change Info, and then press the ENTER
E
button.
The Time Viewing screen appears.
4. Use the ◄/► buttons to move from entry field to entry field
and the ▲/▼
buttons to change the entries. Where numbers
are displayed, you can also enter numbers directly using the
number keypad on your remote.
5. Press the ENTER
E
button when done.
■
Cancel Schedules: Cancel a show or channel you have
scheduled.
To cancel a scheduled show or channel, follow these steps:
1. Select the Programmed List icon on the left side of the
Channel List screen, and then press the ENTER
E
button.
2. On the Programmed List screen, select the show or channel
entry you want to cancel, and then press the TOOLS button.
The Tools menu appears.
3. Select Cancel Schedules, and then press the ENTER
E
button. The Cancel Schedule screen appears.
4. Select OK, and then press the ENTER
E
button.
■
Information: Display the information for a show or channel you
have scheduled. You can also change the schedule Information.
1. Select the Programmed List icon on the left side of the
Channel List screen, and then press the ENTER
E
button.
2. On the Programmed List screen, select the show or channel
entry you want information for, and then press the TOOLS
button. The Tools menu appears.
3. Select Information, and then press the ENTER
E
button.
The Time Viewing Information screen appears.
4. Select Change Info and press the ENTER
E
button to
change information, or select Close and press the ENTER
E
button to close the Information screen.
■
Select All / Deselect All: You can select or deselect all channels
in the channel list.
❑ Other Channel Menu Functions
Channel Mode (Added Channels/Favorite
Channels)
Lets you select the channel list displayed when you press the
<CH> (Channel) button on your remote. For example, if you
select Favorite Channels, you will only see Favorite channels when
you press the <CH> button.
Fine Tune
Analog channels only.
If the reception is clear, you do not have to fine tune the channel,
as this is done automatically during the search and store
operation. If the signal is weak or distorted, fine tune the channel
manually.
✎ Select the channel, and then selec t Fine Tune.
✎ Fine tuned channels that have been saved are marked wi th
an asterisk “*” on the right-hand side of the ch annel number
in the channel banner.
✎To reset fin e-tuning, select the chann el, select Fine Tune, and
then select Reset on the Fine Tune screen.
Setup Menu
Plug & Play
Lets you re-run the Plug & Play initial setup procedure. For
instructions, see your Quick Start Guide.
Language
Set the menu language.
✎ Choose between English, Español, and Français.
❑ Setting the Time
Time
✎
The time you set will appe ar when you press the INFO
button.
■
Clock: Set the clock so you can use the various timer features
of the TV.
✎ If you disconnect the power cord, you have to set the
clock again.
To set the clock, follow these steps:
1. Select Setup >Time > Clock.
2. Press ENTER
E
and select Auto or Manual, and then press
ENTER
E
again.
If you selected Auto:
The TV will automatically download the correct time from a
digital channel.
• Select Time Zone, and then press the ENTER
E
button.
Use the▲/▼ buttons to select your Time Zone, and then
press ENTER
E
.
• Select DST (Daylight Savings Time), and then press
ENTER
E
. Select On if you want to turn the DST
adjustment on and off manually. Select Off to turn off the
DST adjustment. Select Auto if you want the TV to adjust
to DST automatically. Press ENTER
E
when done.
✎ DST and Time Zone function a re only available when
the Clock Mode is set to Auto.
If you selected Manual:
The Clock Set screen appears. Use the ▲/▼ buttons to
change the values in each field or use the number buttons to
enter the values directly. Use the ◄/► buttons to move from
field to field. When done with all the fields, press ENTER
E
.
✎ Available only when Clock Mode is set to Manual.
■
Sleep Timer
t
Automatically shuts off the TV after a preset period of time. (30,
60, 90, 120, 150 and 180 minutes).
✎ To cancel the Sleep Timer, select Off.
Timer 1 / Timer 2 / Timer 3
Turns the TV on and off automatically at times and days you
select. You can set three different on/off timer settings.
✎ You must set the clock first.
■
On Time / Off Time: Set the hour, minute, am/pm, and
Activate/Inactivate fields for the On Time and Off Time. Use the
◄/► buttons to move from field to field. Use the ▲/▼ buttons
to change the values in each field. To activate the timer with
the setting you have chosen, set the Activate/Inactivate field to
Activate.
■
Volume: Set the desired loudness.
■
Contents: To select what will be turned on when the timer
setting is activated. You can set the TV to turn on a specific
channel or play back contents such as photo or audio files.
Use the ◄/► buttons to move to move to the Contents field,
and then press the ENTER
E
button. The Contents screen
appears. Use the ◄/► buttons to move from field to field. Use
the ▲/▼ buttons to change the values in each field.
- TV/USB: Select TV or USB. The USB device must be
connected to your TV before you can select USB.
- Antenna: Displays the current antenna source, Air or Cable.
- Channel: If you have selected TV, select the desired channel.
- Music/Photo: If you have selected USB, follow these steps to
select a folder containing MP3 (Music) or JPEG (Photo) files on
the USB device:
✎ The maximum displayed number of files, including sub
folders, in one folder of USB storage device is 2000.
✎ The media may not be playing smoothly when using the
device lower than USB 2.0.
1. Use the ◄/► buttons to move to the field under Music
or the field under Photo, and then press the ENTER
E
button. The TV displays a single folder (the Root folder)
and the type or name of the device.
2. Press the ENTER
E
button. A list of folders on the device
appears.
✎ If there are no folders on your device, press the
Yel low select button to selec t the Root folder, and
then press the RETURN button. The Timer screen
re-appears.
3. Use the ▲/▼ buttons to highlight a folder that contains
music or photos, and then press the Yellow select button
to select the folder.
4. Press the RETURN button. The Timer screen re-appears.
■
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat,
Sat~Sun or Manual. If you select Manual, you can select the
days you want to activate the timer by using the ◄/► buttons
to highlight the day, and then pressing the ENTER
E
button.
To unselect a day, highlight it, and then press the ENTER
E
button.
When you finished making all your selections on the Timer screen,
press either the ENTER
E
or RETURN button.
The On Screen Menus
Your TV has two kinds of menus, the Main menu and the various
Tools menus. The Main menu gives you access to most or all of
the menu options available on your TV. The Tools menus display
a selected number of frequently used menu options that change
depending on the screen you are viewing.
The Main menu has seven primary categories:
y Picture y Input
y Sound y Application
y Channel y Support
y Setup
To view the Main menu, press the MENU button on your remote. To
view a Tools menu, press the TOOLS button on your remote.
✎ The menu options that appear in the Main menu depend
on the Source you have selected. For example, i f you have
selected the HDMI source, the Channel category will not
appear. To see the Channe l category, you must first sele ct TV
in the Source List.
The Menu options are presented below, arranged by Main menu
categories. A Tools button symbol
(
t
) next to an option
name indicates the option is also available in one of the Tools
menus.
Picture Menu
Mode
t
Select your preferred picture mode.
✎ When your TV is conne cted to a PC, you can only select
Entertain and Standard
.
■
Dynamic: Brightens the screen. Suitable for a bright room.
■
Standard: Suitable for a normal.
■
Movie: Darkens the screen, making it less glary. Suitable for
watching movies in a darkened room.
■
Entertain: Sharpens the picture. Suitable for games.
✎ Only available when th e TV is connected to a PC.
Backlight / Contrast / Brightness / Sharpness /
Color / Tint (G/R)
■
Backlight: Adjusts the brightness of the screen by adjusting the
brightness of the individual pixels.
■
Contrast: Increases or decreases the contrast between dark and
light areas of the picture.
■
Brightness: Adjusts the brightness of the screen. Not as
effective as Backlight.
■
Sharpness: Sharpens or dulls the edges of objects.
■
Color: Adjusts the color saturation. The higher the Color setting,
the more intense the color. Low settings remove color and the
picture becomes black, white and gray.
■
Tint (G/R): Adjusts the amount of green and red in the picture.
As you increase the amount of green, the amount of red
decreases and vice versa.
✎ When the T V is connected to a PC, you can only m ake
change s to Backlight, Contrast, Brightness, and
Sharpness.
Picture Options
✎
When the T V is connected to a PC, you can only make
change s to the Color Tone, Size and HDMI Black Level.
■
Color Tone (Cool / Standard / Warm): Cool makes the picture
bluer (cooler). Warm make the picture redder (warmer).
■
Size: Set the size and aspect ratio of the picture on the screen.
Your cable box or satellite receiver may have its own set of
screen sizes as well. However, we highly recommend you use
the TVs 16:9 mode most of the time.
✎ The menu is deactivated, when the H. 264 (1080p) DTV is
being played.
16:9: Sets the picture to the 16:9 wide screen format.
Zoom1: Provides moderate magnification of the picture. Sides,
top, and bottom are cut off.
Zoom2: Provides larger magnification of the picture. Sides, top,
and bottom are cut off.
Wide Fit: Enlarges the aspect ratio of the picture so the picture
fits the entire screen.
4:3: Sets the picture to the old, 4:3 format and puts black or gray
borders on the right and left of the picture.
✎ Do not watch you r TV in the 4:3 format for a long time.
Traces of borders displayed on the left, right and center of
the scree n may cause image retention (scre en burn) whic h
is not covered by the warrant y.
Screen Fit: Displays the full image without any cut-off when
your TV is inputting HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) HD signals.
✎ HD (High Definition) has a 16:9 aspect ratio and 1080i/1080p
(1920x1080) or 720p (1280x720) resolution.
✎ You can adjust and store settings for each external device you
have connected to an input on the TV. Picture Sizes available
by Input Source are listed below:
Input Source Picture Size
ATV, AV, Component (480i, 480p)
16:9, Zoom1,
Zoom2, 4:3
DTV (1080i), Component (1080i, 1080p), HDMI
(720p, 1080i, 1080p)
16:9, Wide Fit,
4:3, Screen Fit
■
Digital Clean View (Off / Low / Medium / High / Auto) : If the
broadcast signal received by your TV is weak, you can activate
the Digital Clean View feature to reduce any static and ghosting
that may appear on the screen.
✎ When the signal is weak, try all the Digital Clean V iew
options until the TV dis plays the best picture.
■
HDMI Black Level (Normal / Low) : For HDMI signals, select
the black level to adjust the screen depth. Low make blacks look
darker.
✎ Available only in HDMI mode (RGB signals).
■
Film Mode (Off / Auto) : Sets the TV to automatically sense and
process film signals from all sources and adjusts the picture for
optimum quality.
✎ Available in ATV, DTV (interlace), AV, COMPONENT (480i /
1080i) and HDMI (480i / 1080i).
■
Motion Lighting (Off / On): Reduce power consumption by
brightness control adapted motion.
✎ Available in Standard mode only.
Picture Reset
■
Picture Reset (Reset Picture Mode/Cancel): Resets the
picture settings to their factory defaults.
❑ Other Features
Program Rating Lock
The Program Rating Lock feature lets you block programs
you've determined are inappropriate for your children based on
the program's ratings. To access the Program Rating Lock
feature and make any changes, you must enter a PIN (personal
identification number). To watch a blocked program, you must also
enter the same PIN.
✎ Program Rating Lock is not available in HDMI or
Component mode.
✎ The default PIN number of a new TV set is “0-0-0-0”. You can
set your own PIN using the Change PIN function.
How It Works
When you access the Program Rating Lock Menu functions for
the first time, the PIN input screen appears. Enter 0-0-0-0. The PIN
screen closes and the Program Rating Lock Menu appears. Every
time you access the Program Rating Lock functions, the PIN
screen will appear and you must enter a PIN.
When the Rating Lock screen appears, select Program Rating
Lock, and then press ENTER
E
. Select On, and then press the
ENTER
E
key again. Depending on what type of programs or
movies you want to block, select one of the options on the screen,
and then press the ENTER
E
button. The options are listed below:
■
TV Parental Guidelines: You can block TV programs based
on their ratings. This function allows you to control what your
children are watching.
■
MPAA Rating: You can block movies based on their MPAA
ratings. The Motion Picture Association of America (MPAA) has
implemented a rating system that provides parents or guardians
with advanced information on which films are appropriate for
children.
■
Canadian English: You can block TV programs based on their
Anglophone Canadian ratings.
■
Canadian French: You can block TV programs based on their
French Canadian ratings.
■
Downloadable U.S. Rating: Parental restriction information can
be used while watching DTV channels.
Locking/Blocking Programs or Movies
You lock or block programs and/or movies in essentially the same
way for each option. Each option displays a grid or table. All the
tables have ratings listed on the left. The TV Parental Guidelines
option also has kinds of content listed across the top: ALL: Lock all
TV ratings. / FV: Fantasy violence / V: Violence / S: Sexual situation
/ L: Adult Language / D: Sexually Suggestive Dialog.
To lock/block movies or shows with certain ratings and/or kinds of
content, click the square next to the rating and/or under the kind of
content. A lock appears. To unlock/unblock, click the square again.
When you click a low rating, all the ratings above it will also display
locks. You can also Allow All or Lock All. When done, press the
RETURN button on your remote.
■
Change PIN: The Change PIN screen will appear. Choose any
4 digits for your PIN and enter them in Enter New PIN fields.
Re-enter the same 4 digits in Confirm New PIN fields. When the
Change PIN screen disappears, press the OK button. The TV
has memorized your new PIN.
✎ If you forget the PIN, press the remote-control buttons in
the following sequence, which resets the pin to “0-0-0-0” :
POWER (off) → MUTE → 8 → 2 → 4 → POWER (on)
Game Mode (On/Off)
When you connect a game console such as a PlayStation™
or Xbox™ to your TV, you can enjoy a more realistic gaming
experience by turning on the Game Mode function.
✎ Precautions and limitations for game mode:
x Before you disconnect the game console and connect another
extern al device, set Game Mode to Off in the setup menu.
x If you disp lay the TV menu in Game Mode, the scre en shakes
slightly.
✎ Game Mode is not available when the input source is set to
TV.
✎ After connecting the game console, set Game Mode to On.
You may notice slightly reduced picture quality.
Caption
(On-Screen Text Dialogue)
■
Caption: You can switch the caption function on or off. If
captions are not available, they will not be displayed on the
screen.
✎ The Caption feature does not work in Component or
HDMI mode.
■
Caption Mode: You can select the desired caption mode.
Default / CC1~CC4 / Text1~Text4: (analog channels only) The
Analog Caption function operates in either analog TV channel
mode or when a signal is supplied from an external device to the
TV. (Depending on the broadcasting signal, the Analog Caption
function may or may not work with digital channels.)
Default / Service1~Service6 / CC1~CC4 / Text1~Text4:
(Digital channels only) The Digital Captions function works with
digital channels.
✎ Se rv ice1~6 may not be available in digital ca ption mode
depending on the broadcast.
■
Digital Caption Options: (Digital channels only)
Size: Options include Default, Small, Standard and Large. The
default is Standard.
Font Style: Options include Default and Styles 0 to 7. The
default is Style 0.
Foreground Color: Options include Default, White, Black, Red,
Green, Blue, Yellow, Magenta and Cyan. You can change the
color of the letters. The default is White.
Background Color: Options include Default, White, Black,
Red, Green, Blue, Yellow, Magenta and Cyan. You can change
the background color of the captions. The default is Black.
Foreground Opacity: This adjusts the opacity of text. Options
include Default, Transparent, Translucent, Solid and Flashing.
Background Opacity: This adjusts the opacity of the
caption background. Options include Default, Transparent,
Translucent, Solid and Flashing.
Return to Default: This option sets each Size, Font Style,
Foreground Color, Background Color, Foreground Opacity
and Background Opacity to its default.
✎ Digital Caption Options are available only when you can
select Default and Servic e1 ~ Service 6 in Caption Mode.
✎ The Foreground and Bac kground cannot be set to the
same color.
Figures and illustrations in this User Manual are provided for reference
only and may differ from actual product appearance. Product design and
specifications may be changed without notice.
Important Warranty Information Regarding
Television Format Viewing
✎
See the war ranty card for more information on warranty
terms.
Wide screen format LED Displays (16:9, the aspect ratio of the
screen width to height) are primarily designed to view wide screen
format full-motion video. The images displayed on them should
primarily be in the wide screen 16:9 ratio format, or expanded to
fill the screen if your model offers this feature and the images are
constantly moving. Displaying stationary graphics and images on
screen, such as the dark sidebars on non- expanded standard
format television video and programming, should be limited to no
more than 5% of the total television viewing per week. Additionally,
viewing other stationary images and text such as stock market
reports, video game displays, station logos, web sites or computer
graphics and patterns, should be limited as described above for
all televisions. Displaying stationary images that exceed the above
guidelines can cause uneven aging of LED Displays that leave
subtle, but permanent burned-in ghost images in the LED picture.
To avoid this, vary the programming and images, and primarily
display full screen moving images, not stationary patterns or dark
bars. On LED models that offer picture sizing features, use these
controls to view different formats as a full screen picture. Be careful
in the selection and duration of television formats you use for
viewing. Uneven LED aging as a result of format selection and use,
as well as burned-in images, are not covered by your Samsung
limited warranty.
•SAMSUNGELECTRONICSNORTHAMERICANLIMITED
WARRANTY STATEMENT
Subject to the requirements, conditions, exclusions and limitations
of the original Limited Warranty supplied with Samsung Electronics
(SAMSUNG) products, and the requirements, conditions, exclusions
and limitations contained herein, SAMSUNG will additionally
provide Warranty Repair Service in the United States on SAMSUNG
products purchased in Canada, and in Canada on SAMSUNG
products purchased in the United States, for the warranty period
originally specified, and to the Original Purchaser only.
The above described warranty repairs must be performed by a
SAMSUNG Authorized Service Center. Along with this Statement,
the Original Limited Warranty Statement and a dated Bill of Sale
as Proof of Purchase must be presented to the Service Center.
Transportation to and from the Service Center is the responsibility of
the purchaser. Conditions covered are limited only to manufacturing
defects in material or workmanship, and only those encountered
in normal use of the product. Excluded, but not limited to, are
any originally specified provisions for, in-home or on-site services,
minimum or maximum repair times, exchanges or replacements,
accessories, options, upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please
call toll-free:
–– In the United States : 1-800-SAMSUNG (1-800-726-7864)
–– In Canada : 1-800-SAMSUNG
Still image warning
Avoid displaying still images (such as jpeg picture files) or still
image elements (such as TV channel logos, TV shows or movies
in panorama or 4:3 format, stock or news scroll bars, etc.) on the
screen. The constant display of still pictures can cause ghosting or
image burn-in (image retention) on the LED screen, which will affect
image quality. To reduce the risk of this effect, please follow the
recommendations below:
•Avoid displaying the same TV channel for long periods.
•Always try to display any image in full screen mode. Use the TV's
Picture Options menu to select the optimal screen size.
•Reduce brightness and contrast values to the minimum required
to achieve the desired picture quality. Values that exceed the
minimum may speed up the burn-in process.
•Frequently use all TV features designed to reduce image retention
and screen burn-in. Refer to proper user manual section for
details.
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care center.
Country CANADA U.S.A
Address
Samsung Electronics
Canada Inc. 2050 Derry
Road West, Mississauga,
Ontario L5N 0B9 Canada
Samsung Electronics
America, Inc. 85
Challenger Road
Ridgefield Park, NJ 07660
Customer Care
Center
1-800-SAMSUNG (726-7864)
Web Site
www.samsung.com/ca/
support (English)
www.samsung.com/ca_fr/
support (French)
www.samsung.com/us/
support
LED TV
user manual
© 2014 Samsung Electronics Co., Ltd. All rights reserved.
- 2 -- 1 -
- 6 -- 5 -
- 3 -
- 7 -
- 4 -
- 8 -
BN68-05829K-01
Sound Menu
Mode
t
■
Standard: Selects the normal sound mode.
■
Music: Emphasizes music over voices.
■
Movie: Provides the best sound for movies.
■
Clear Voice: Emphasizes voices over other sounds.
Equalizer
Available in Standard sound mode only.
■
Balance L/R: Adjusts the balance between the right and left
speaker.
■
100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth
Adjustment): Adjusts the loudness of specific bandwidth
frequencies.
■
Reset: Resets the equalizer to its default settings.
DTS TruSurround
Available in Standard sound mode only.
DTS TruSurround is a patented DTS technology that solves
the problem of playing 5.1 multichannel content over two
speakers. TruSurround delivers a compelling, virtual surround
sound experience through any two-speaker playback system,
including internal television speakers. It is fully compatible with all
multichannel formats.
Preferred Language
Digital channels only.
Digital-TV broadcasts can transmit many audio tracks
simultaneously (for example, simultaneous translations of a program
into foreign languages).
✎ You can only select a language from among th e ones being
broadcast.
Multi-Track Sound (MTS)
Analog channels only.
■
Mono: Select for channels that are broadcasting in mono or if
you are having difficulty receiving a stereo signal.
■
Stereo: Select for channels that are broadcasting in stereo.
■
SAP: Select to listen to the Separate Audio Program, which is
usually a foreign-language translation.
✎ Depending on the program being broadcast, you can listen to
Mono, Ste reo or SAP.
Auto Volume
Automatically adjusts the volume level when you change video
sources or content so the level remains the same.
SPDIF Output
The SPDIF (Sony Philips Digital InterFace) outputs an
uncompressed digital audio signal when you connect the digital
audio jack on the back of the TV to a digital audio in jack on a
receiver or home theater.
■
Audio Format (PCM/Dolby Digital): You can select the Digital
Audio output (SPDIF) format. The available Digital Audio output
format may differ depending on the input source.
✎ By conne cting the TV to a receiver or home theater with
Dolby Digital and 5.1ch speakers and s electing Dolby
Digital, you can maximize your interactive 3D sound
experience.
■
Audio Delay: Lets you correct timing mismatches between the
audio track and the video when you are watching the TV and
listening to digital audio output from the TV through an external
device such as an AV receiver. When you select Audio Delay, a
slider appears. Use the left and right arrow buttons to adjust the
slider. Press ENTER
E
when done (0ms ~ 250ms).
Speaker Select
A sound echo may occur due to a difference in decoding speed
between the main speaker and the audio receiver. In this case, set
the TV to External Speaker.
✎ When Speaker Select is set to External Speaker, the
volume and MUTE buttons will not operate and the sound
settings will be limited.
✎ When Speaker Select is set to External Speaker.
x TV Speaker: Off, External Speaker: On
✎ When Speaker Select is set to TV Speaker.
x TV Speaker: On, External Speaker: On
✎ If there is no video signal, both speaker s will be mute.
Visual Impaired
Digital channels only.
Adds verbal description to the main audio to help the visually
impaired.
Sound Reset
■
Reset All: Resets all sound settings to the factory defaults.
Channel Menu
❑ Memorizing Channels
When you first set up your TV using Plug & Play, the TV
memorized the channels that were available over the air or through
your cable system and added them to the Channel List. The
Antenna and Auto program functions described below let you
re-run the channel memorization function without having to re-run
the Plug & Play procedure.
Antenna (Air / Cable)
Before your television can memorize the available channels, you
must select your TV's signal source, Air (using an antenna) or
Cable. Select MENU >Channel > Antenna > Air or Cable. After
you have selected the signal source, go on to the Auto Program
function.
✎ Selecting the signal source using the Antenna function also
determines the signal source the TV is tuned to. For example,
if you rece ive your TV si gnal over the air, and you select
Cable, you will see o nly snow. You must select Air to see a
picture.
Auto Program
The Auto Program function memorizes all channels that are
available over the air or through your cable system and adds them
to the Channel List.
To start Auto Program, follow these steps:
1. Push MENU
m
→ Channel → Auto Program → ENTER
E
on your remote. The Antenna Source screen appears.
2. On the Antenna Source screen, select the source of your TV
signal.
Boot Logo
Enable/disable displaying the logo while the TV starts up.
Eco Solution
■
Energy Saving (Off / Low / Medium / High / Picture Off) :
This adjust the brightness of the TV in order to reduce power
consumption. If you select Picture Off, the screen is turned
off, but the sound remains on. Press any button except volume
button to turn on the screen.
■
Eco Sensor (Off / On): To enhance your power savings; the
picture settings will automatically adapt to the light in the room.
✎ If you adjust the Backlight, the Eco Sensor will be set to
Off.
Min. Backlight: When Eco Sensor is On, the minimum screen
brightness can be adjusted manually.
✎ If Eco Sensor is On, the display br ightness may change
(become slightly darker in most cases) depending on the
surrounding light intensity.
■
No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): Sets
how quickly the TV switches to standby mode, if no picture is
being received.
✎ Disabled when the PC is in power saving mode.
■
Auto Power Off (Off / On): The TV will be automatically turned
off when no user operation is received for 4 hours.
Auto Protection Time
■
Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10
hours): If the screen remains idle with a still image for a certain
period of time you define, the screen saver is activated to prevent
the formation of ghost images on the screen.
Support Menu
Self Diagnosis
■
Picture Test: Use to check for picture problems. If the problem
appears in the test picture, select Yes and follow the directions
on the screen.
■
Sound Test: Use the built-in melody sound to check for sound
problems. If the problem occurs during the test, select Yes and
follow the directions on the screen.
■
Signal Strength: (Digital channels only) An HD channel’s
reception quality is either perfect or the channels are unavailable.
Adjust your antenna to increase signal strength.
■
Reset: Reset all settings to the factory defaults.
✎ The PIN inp ut screen appears before the setup screen.
✎ Enter your 4- digit PIN. Change the PIN using the Change
PIN option.
Software Upgrade
Software Upgrade can be performed by downloading the latest
firmware from samsung.com to a USB memory device.
HD Connection Guide
Refer to this information when connecting external devices to the
T V.
Contact Samsung
View this information when your TV does not work properly or
when you want to upgrade the software. You can find information
regarding our call centers and how to download products and
software.
Media Play
Enjoy photos, music and/or movie files saved on a
USB Mass Storage Class (MSC) device.
P
POWER
MEDIA.P
❑ Connecting a USB Device
1. Turn on your TV.
2. Connect a USB device containing photo, music, and/or movie
files to the USB jack on the back of the TV. A pop up window
appears.
3. Press the MEDIA.P button on your remote. The Media Play
menu appears.
❑ Using the Media Play Menu
SUM
■
Change Device
E
Enter
R
Return
Media Play
Videos
To open Media Play in the Menu, follow these steps:
1. Press the MENU button. Then, press the ▲ or ▼ button to
select Application on the left, and then press the ENTER
E
button.
2. Press the ▲ or ▼ button to select Media Play (USB), and then
press the ENTER
E
button.
3. Press the ◄ or ► button to select an icon (Videos, Music,
Photos, Settings), and then press the ENTER
E
button.
✎ Media Play might not work properly with u nlicensed
multimedia files.
✎ Need-to-Know List before using Media Play (USB)
x The fil e system suppo rts FAT16, FAT32 and NTFS .
x Cert ain types of U SB Digital camera and aud io devices m ay not
be compa tible with thi s TV.
x Media Pl ay only suppo rts USB Mas s Storage Clas s (MSC)
device s. MSC is a Mass Sto rage Class Bulk-Only Transport
device. E xamples of MSC are Thumb drives and Fla sh Card
Readers. Devices s hould be connected direc tly to the TV’s USB
port. USB HDD is not supported.
x Before co nnecting your device to the T V, please back up your
files to prevent them fro m damage or loss of data. SAMSUNG is
not responsible for any data file damage or data los s.
x A USB device that requires high power (more than 0.5A) may not
be supported.
x Do not disconnect the USB device while it is loading.
x The higher the resolution of the image, the longer it takes to
display on the screen.
x The maximum supported JPEG resolution is 15360 x 8640 pixels.
x If a file is corrupted or the TV does not support the file type, the
“Not Supported File Format” message appears.
x The TV c annot play MP3 files with DRM that have been
downloaded from a for-pay site. Digital Rights Management
(DRM) is a technology that supports the creation, distribution,
and management of digital content in an integrated and
compre hensive way, incl uding protecting the rights a nd interests
of content p roviders, preventing illegal copyin g of contents, and
managing billing and settlements.
[UH4000-ZA]BN68-05829K-01ENG.indb 1 2014-06-25 3:04:48