Crestron C2N-IO Installation Manual

Download Installation manual of Crestron C2N-IO Computer Hardware, Control Unit for Free or View it Online on All-Guides.com.

Brand: Crestron

Category: Computer Hardware , Control Unit

Type: Installation manual for Crestron C2N-IO

Pages: 2 (0.63 Mb)

Download Crestron C2N-IO Installation manual

Crestron C2N-IO Installation manual - Page 1
1
Crestron C2N-IO Installation manual - Page 2
2
Crestron Electronics, Inc. Installation Guide - DOC. 7236A
15 Volvo Drive Rockleigh, NJ 07647 (2031434)
Tel: 888.CRESTRON 11.11
Fax: 201.767.7576 Specifications subject to
www.crestron.com change without notice.
Crestron C2N-IO
Control Port Expansion Module
Installation Guide
Regulatory Compliance
Further Inquiries
If you cannot locate specific information or have questions after reviewing this guide, please take advantage of
Crestron's award winning customer service team by calling Crestron at 1-888-CRESTRON [1-888-273-7876]. For
assistance in your region, please refer to the Crestron Web site (www.crestron.com) for a listing of Crestron
worldwide offices.
You can also log onto the online help section of the Crestron Web site (www.crestron.com/onlinehelp) to ask
questions about Crestron products. First-time users will need to establish a user account to fully benefit from all
available features.
Future Updates
As Crestron improves functions, adds new features and extends the capabilities of the C2N-IO units, additional
information may be made available as manual updates. These updates are solely electronic and serve
as intermediary supplements prior to the release of a complete technical documentation revision.
Check the Crestron Web site periodically for manual update availability and its relevance. Updates are identified
as an “Addendum” in the Download column.
Federal Communications Commission (FCC) Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
The
C2N-IO is a very compact device that adds control ports to any Crestron
®
2-Series or
3-Series™ control system. It connects via the Cresnet
®
control network and provides one
RS-232, one IR and two relay control ports. It can be mounted to any flat surface using two
screws or adhesive reclosable fastener (3M
®
Dual Lock
®
included).
The C2N-IO is ideally designed for use with a Crestron TPCS-4SM or TPCS-4SMD touch
screen control system, providing an advanced wall mount control package that fits in a 2-gang
US or UK electrical box. The C2N-IO can be mounted inside the electrical box, behind the
touch screen or it can be installed remotely, requiring just one Cresnet control cable for power
and communications.
DESCRIPTION
Specifications
Specifications for the C2N-IO are listed in the following table.
C2N-IO Specifications
* Refer to "Identity Code" in the last column on this page for details.
SPECIFICATION
DETAILS
Power
Cresnet Power Usage
1 Watt (42 mA @ 24 Volts DC)
Default NET ID A5*
Device Database
Version 37.05.001 or later
Crestron Database
Version 28.05.001 or later
Environmental
Temperature
Humidity
Heat Dissipation
32° to 104° F (0° to 40° C)
0% to 90% RH (non-condensing)
3.5 BTU/Hr
Dimensions
Height
Width
Depth
2.25 in (58 mm)
3.50 in (89 mm), 4.38 in (112 mm) with bracket
0.83 in (21 mm)
Weight 3 oz. (75 g)
Included Accessories Mounting bracket, Dual Lock fastener
Physical Description
This section provides information on the connections, controls and indicators available on
your C2N-IO.
C2N-IO Overall Dimensions
As of the date of manufacture, the C2N-IO has been tested and found to comply with
specifications for CE marking and standards per EMC and Radiocommunications
Compliance Labelling.
Communications
Cresnet
RS-232
IR/Serial
Cresnet slave device, 2-Series and 3-Series compatible
Supports 2-way device control and monitoring up to
115.2k baud with software handshaking
Suports 1-way device control via infrared up to 1.2 MHz
or serial TTL/RS-232 (0-5 Volts) up to 115.2k baud
Enclosure Metal, freestanding or surface mount;
Fits inside 2-gang electrical box, 1.38 in (35 mm)
minimum internal box depth required for C2N-IO and
TPCS-4SM(D) combined
The C2N-IO has been tested by Intertek Testing Services NA Inc. and complies with
ANSI/UL 2043, the Standard for Fire Test for Heat and Visible Smoke Release for
Discrete Products and Their Accessories Installed in Air-Handling Spaces-Third Edition.
3.50 in
(89 mm)
2.25 in
(58 mm)
123
5
6
87
4
0.83 in
(21 mm)
CAUTION: Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user's authority to operate the equipment.
Identity Code
The Net ID of the C2N-IO has been factory set to A5 (with a mechanical setting of 00).
The Net ID of the C2N-IO can be set using one of two methods:
Manual setting: Set the two NET ID controls (from 03 to FE) to match the
Net ID
in the SIMPL Windows program.
Touch-settable ID: Set the two NET ID controls to 00 and set the Net ID using
Crestron Toolbox. This is the factory setting. For more details, refer to the
Crestron Toolbox help file.
When setting the Net ID, consider the following:
The Net ID of each unit must match an ID code specified in the control system
program.
Each network device must have a unique Net ID.
Installation
The C2N-IO can be installed inside a standard 2-gang US or UK electrical box using the
included Dual Lock fastener or mounted to another other suitable location using the
included mounting bracket.
NOTE: Screws to secure the C2N-IO to a surface are not included.
NOTE: The NET ID controls on the C2N-IO are factory set to 00. This allows changing
the Net ID with Crestron Toolbox™ (optional).
To use the included mounting bracket, use the included screws to attach the mounting
bracket as shown in the following illustration. The only tool required is a #1 Phillips
screwdriver.
Attach Mounting Bracket to C2N-IO (Optional)
Hardware Hookup
Make the necessary connections as shown in the illustration that follows this paragraph.
Refer also to "Check Network Wiring" on the next page, before attaching the 4-position
NET connector. Apply power after all connections have been made.
CAUTION: Incorrect wiring may damage the C2N-IO.
(Continued on following page)
C2N-IO Overall Dimensions (with Mounting Bracket)
3.98 in
(101 mm)
4.38 in
(112 mm)
Connectors, Controls & Indicators
CONNECTORS
1
,
CONTROLS &
INDICATORS
DESCRIPTION
RELAY
(1) 4-pin captive screw terminal block comprising (2)
normally open, isolated relays;
Rated 1 Amp, 30 Volts AC/DC,
Solid state arc suppression across contacts
#
1
12
TX
GND
RX
SG
HI
LO
24 Y Z G
2 COM
(1) 3-pin captive screw terminal block;
Bidirectional RS-232 port;
Up to 115.2k baud, software handshaking support
3IR
(1) 2-pin captive screw terminal block,
IR/Serial output port;
IR output up to 1.2 MHz;
1-way serial TTL/RS-232 (0 - 5 Volts) up to 115.2 k
baud
4 PWR LED
(1) Green LED, indicates operating power supplied
via Cresnet control network
5 NET LED
(1) Amber LED, indicates communication with
Cresnet system
6
SETUP
(LED and Button)
(1) Red LED and (1) recessed miniature push button
for touch-settable ID (TSID)
7
NET ID
(2) Rotary switches for manually setting Cresnet ID;
'00' setting enables TSID
8
NET
(2) 4-pin captive screw terminal blocks;
Cresnet slave ports, paralleled
24 Power (24 Volts DC)
Y Data
Z Data
G Ground
Network Wiring
When wiring the Cresnet network, consider the following:
Use Crestron Certified Wire.
Use Crestron power supplies for Crestron equipment.
Provide sufficient power to the system.
For networks with 20 or more devices, use a Cresnet Hub/Repeater (CNXHUB) to maintain
signal quality.
For more details, refer to "Check Network Wiring" on the next page.
SETUP
CAUTION: Insufficient power can lead to unpredictable results or damage to the
equipment. Please use the Crestron Power Calculator to help calculate how much power is
needed for the system (www.crestron.com/calculators).
RELAY:
To Controllable
Devices
COM:
To Any RS-232,
-422 or -485 Device
IR:
To IRP2 or
Serial Devices
NET:
To Any Cresnet
Network Device