Crown Audio CEAS1 Installation Manual

Download Installation manual of Crown CEAS1 Other for Free or View it Online on All-Guides.com.

Brand: Crown

Category: Other

Type: Installation manual

Model: Crown CEAS1 , Crown CEAS2

Pages: 2 (0.23 Mb)

Download Crown CEAS1 Installation manual

Crown CEAS1 Installation manual - Page 1
1
Crown CEAS1 Installation manual - Page 2
2
Optional Output Connectors for CE Series Amplifiers
Installation Guide (CEAS1/CEAS2)
page 1 of 2
128271-1
10/99
CE Series Amplifier 5-Way Binding Post
Output Connectors
PART # CEAS1
PART # CEAS2
P.O. Box 1000 Elkhart, IN 46515 Phone: (219) 294-8000 Fax: (219) 294-8250
Web Page: http://www.crownaudio.com
CE Series Amplifier Barrier Strip
Output Connectors
OUTPUT CONNECTOR
TOOLS REQUIRED:
Torx #T-15 screwdriver
INCLUDES:
2 - #8 x 1¼ in. screws
• CE optional output connector
WARNING: CEAS1 AND CEAS2 OPTIONAL OUTPUT
CONNECTORS MUST BE INSTALLED BY A QUALIFIED
SERVICE CENTER.
Follow the installation instructions provided on the next
page to install your CE Optional Output Connector. Once
installed, your CE amplifier will offer barrier block or 5-way
binding post output connectors (depending on the kit
ordered).
Note that installing the optional output connectors does
NOT defeat the Neutrik
®
Speakon connectors on the back
panel of the amplifier. If, at any time, you prefer to use the
standard Neutrik
®
Speakon
®
output connectors, it is not
necessary to remove the optional output connector panel
from the amplifier. Instead, simply connect your speaker
wires to the Speakon
®
output connectors instead of the
optional output connectors.
CE Series Amplifier with Optional Output Connector Installed