Dell SonicWALL TZ300 Quick Start Manual

Download Quick start manual of Dell SonicWALL TZ300 Firewall for Free or View it Online on All-Guides.com.

Brand: Dell

Category: Firewall

Type: Quick start manual for Dell SonicWALL TZ300

Pages: 2

Download Dell SonicWALL TZ300 Quick start manual

Dell SonicWALL TZ300 Quick start manual - Page 1
1
Dell SonicWALL TZ300 Quick start manual - Page 2
2
Dell SonicWALL TZ300 Quick Start Guide
TZ300 front and back panels
Figure 1. Front and back panels
Rear Panel
SonicWALL TZ300
X0 X1 X2 X3 X4
1000/act
10/100/act
lan wan
U0
ss
1000
wan
X0X1X2X3X4
lan
power
console
Front Panel
USB 3.0 port
Power
Test
Fast blinking is initializing
Slow blinking is SafeMode
Service
For future use
Top - 10/100 Mbps when lit
Bottom - 1 Gbps when lit
X1 WAN Port
X4/X3/X2
Power
Console
Port
X0 LAN Port
Congurable ports
1 Check package contents
Verify that your package has the following contents:
Dell SonicWALL appliance
Ethernet cable
Standard power adaptor
Standard power cord
Quick Start Guide
Figure 2. Package Contents
NOTE: The included power cord is approved for use
only in specific countries or regions. Before using a
power cord, verify that it is rated and approved for
use in your location.
SonicWALL TZ300
X0 X1 X2 X3 X4
1000/act
10/100/act
lan wan
U0
ss
1000
2 Power on
Connect the power adaptor to the appliance and to
the power cable. Plug the power cable into an
appropriate outlet (110-240 volts).
The TZ appliance powers on and the Test LED
blinks during the boot sequence.
120V AC
(U.S.)
Internet
U0
ss
SonicWALL TZ300
X0 X1 X2 X3 X4
1000/act
10/100/act
lan wan
1000
U0
ss
SonicWALL TZ300
X0 X1 X2 X3 X4
1000/act
10/100/act
lan wan
1000
3
Connect the interfaces
Connect the WAN interface (X1) to your Internet
connection using a standard Ethernet cable.
Connect the LAN interface (X0) to your computer
using a standard Ethernet cable.
Figure 3. Connecting WAN and LAN interfaces
wan
X1
lan
X0
4 Run the Setup Wizard
In the Web browser on your computer, navigate to
https://192.168.168.168.
In the window that opens, click on the word here
in the line that says, “To launch the Dell
SonicWALL Setup Wizard, click here.”
http://192.168.168.168/
http://192.168.168.168/
TIP: Your computer should be using DHCP IP
addressing.
The SonicOS Startup Guide opens.
Click Next and follow the prompts in the Startup
Guide pages that follow.
Enter the TZ appliance administrator credentials
to change the password, if you wish. Click Next.
NOTE: The default administrator credentials are
Username: admin Password: password
The automatic WAN IP settings are displayed.
Click Next.
The new IP Configuration is displayed. Click Done.
NOTE: For manual configuration, refer to the
SonicOS 6.2 Administration Guide.
Dell SonicWALL™ TZ300
Quick Start Guide
Regulatory Model Number: APL28-0B4