Cyberpower CPS200SU User Manual

Download Operation & user’s manual of CyberPower CPS200SU Inverter for Free or View it Online on All-Guides.com.

Brand: CyberPower

Category: Inverter

Type: Operation & user’s manual for CyberPower CPS200SU

Pages: 2 (0.36 Mb)

Download CyberPower CPS200SU Operation & user’s manual

CyberPower CPS200SU Operation & user’s manual - Page 1
1
CyberPower CPS200SU Operation & user’s manual - Page 2
2
CONGRATULATIONS ON YOUR PURCHASE
Thank you for selecting the CyberPower CPS200SU Power
Inverter + USB. The information contained in this brochure
explains the features and operation of the CPS200SU.
Please take a few moments to read this manual.
PACKAGE CONTENTS
•(1) Power Inverter + USB
•(1) Product Registration Card
•(1) User Manual
FEATURES
1. 2 AC Power Outlets (120v)
2. DC Power Plug
3. 2.1 Amp USB Charging Port
4. Power Status Indicator LED
5. High-Speed Cooling Fan
OPERATING & STORAGE
Operating
•DO NOT allow water or other liquids to come into contact
with the inverter.
•Ambient air temperature should be 32°F104°F (0°C 40°C).
Keep inverter out of direct sun light.
•Keep the inverter’s ventilation slot unobstructed to ensure
airowtotheunit.DO NOT place any items on or over
the inverter during operation. The unit will shut down if it
overheats.
Storage
•Proper storage temperature rang is 32°F 86°F (0°C 30°C)
•Store the inverter in a cool and dry environment.
•Avoid exposing the inverter to heating elements, direct
sunlight or high humidity when not in use.
SPECIFICATIONS
•Model Number: CPS200SU
•Input Voltage: 10.5 to 15.5 Volts
•Output Power: 200 Watts (max)
•Output Voltage: 120 Volts
•Output Frequency: 60Hz
•USB Voltage: 5Vdc
•Output Waveform: Simulated Sine Wave
•Protection Features: Low Voltage, Overheat,
Overload, Short Circuit
SAFETY INFORMATION
•DO NOToperatetheCPS200SUnearammablematerials,
fumes or gasses.
•Always use the inverter where there is adequate ventilation.
DO NOT obstruct the ventilation slots.
•NEVER immerse the unit in water.
•Proper cooling is essential when operating the inverter.
Refrain from placing the inverter near a vehicle’s heat vent or
in direct sunlight.
•Always turn the inverter off when not in use by removing it
from the DC accessory socket.
•Check the warning labels on battery chargers or adapters
before connecting them to the inverter. DO NOT connect
battery chargers or adapters with warnings about using with
inverters.
TROUBLESHOOTING
Power Inverter does not provide power:
1. Poor contact with DC power outlet
Ensure the inverter is securely plugged into the vehicle’s DC
power outlet.
2. Automotive electrical system requires ignition to be on
Turn vehicle ignition to “Accessory” position.
3. Vehicle DC power outlet fuse is blown
Check vehicle fuse panel and replace damaged fuse.
4. Overheating
Allow inverter to cool. Ensure that there is adequate
ventilation around the unit.
5. Vehicle battery voltage below 10.5 volts
Unplug inverter and start the vehicle to charge the battery.
6. Vehicle battery voltage higher than 15.5 volts
Check your vehicle’s user guide for trouble shooting.
7. Inverter is overloaded
Ensure load does not exceed the units Continuous Power
rating(seespecications).
TECHNICAL SUPPORT
Please contact our Tech Support department with installation,
troubleshooting, or general product questions.
•Phone: 1-877-297-6937
•Email: tech@CPSww.com
•Hours of Operation: Monday – Friday, 8:00am – 5:00pm CST
POWER INVERTER + USB
CPS200SU
USER MANUAL