CyberPower CP-H420MP Quick Start Manual

Download Quick start manual of CyberPower CP-H420MP Switch for Free or View it Online on All-Guides.com.

Brand: CyberPower

Category: Switch

Type: Quick start manual for CyberPower CP-H420MP

Pages: 2 (1.44 Mb)

Download CyberPower CP-H420MP Quick start manual

CyberPower CP-H420MP Quick start manual - Page 1
1
CyberPower CP-H420MP Quick start manual - Page 2
2
Quick Start Guide for USB 2.0 4 Port Mobile Battery Powered Hub
Model No. CP-H420MP
This Battery Powered USB Hub makes the most of your notebook computer and workspace
by increasing the number of available USB ports. The need for an AC Power Adapter is
eliminated by Battery Power. There has never been a more convenient way for travelers
and notebook users to utilize USB devices on the road.
Thank you for purchasing a product. To enjoy all the features and benefits
of this USB Hub, please read and follow all installation and operation instruction completely.
1
2
2
3
4
5
8
11
12
13
Table of Contents
Introduction
System Requirements
Package Contents
Specifications - USB Battery Powered Hub
Specifications - Rechargeable Battery
Product Overview
Installation
Appendix A (Troubleshooting)
Appendix B (Radio Interference Statement)
Appendix C (Product Limited Liabilities Warranty)
Introduction
USB(Universal Serial Bus) is currently the standard for most computers, notebooks and
peripherals. The USB connections allow the user to easily connect multiple devices. The
USB 2.0 4 Port Mobile Battery Powered Hub (Model. CP-H420MP) provides
additional ports to connect up to 4 USB devices to a single USB port on your computer.
Thanks to the innovative Battery Power design it is unnecessary to use an AC Power Adapter.
The Mobile Battery Powered Hub is the best choice for mobile computer users requiring a
USB hub.
The Quick Start Guide contains easy instructions in order to show you how to set up and
start using your USB 2.0 4-Port Mobile Battery Powered Hub
System Requirements
Any PC or Macintosh computer with an available USB port and USB-compliant operating
system(Windows 98SE/2000/ME/XP, MacOS 8.6 or above, etc.)
Package Contents
This package includes:
USB 2.0 4 Port Mobile Hub (Model CP-H420MP)
4 AAA Ni-MH Rechargeable Batteries
1.5m A Male-A Female USB Cable
User Manual
Specifications
FUNCTION
USB Ports Downstream
LEDs Power
Battery Discharge
Power Mode
Output Voltage(per port)
Output Currect(per port)
Operating Temperature
Storage Temperature
Humidity
Housing
Weight
Dimensions
SPECIFICATION
4
1(Blue)
1(Red)
Self-Powered
+5V DC
500mA(max)
5°C~40°C
-20°C~60°C
0~80%RH. Noncondensing
Plastic
65.7
65.0 x 99.0 x 18.0 mm
Specifications - Rechargeable Battery
FUNCTION
Battery Type
Nominal Voltage
Nominal Capacity
Charge Condition
Storage Temperature
Nominal Dimension (With Sleeve)
Weight
SPECIFICATION
Rechargeable Ni-MH Cylinderical Cell
+1.2V
650mAh
100mAmp (0.15C)
-20oC ~ 35oC
44.5 x 40.6 x 10.5 mm
48 g
Note:
Please charge before use. The batteries are delivered in an uncharged state.
Product Overview
Product Overview - continued
1) Power Indicator - Blue LED will illuminate when USB Hub is receiving power.
2) Battery Power Switch - Switch on battery power when extra power is needed for
connected USB devices. This switch activates self-powered mode.
3) Battery Discharge Indicator - Red LED will illuminate to indicate when the batteries are in
use. If the batteries are fully discharged, the Red LED will not illuminate.
4) Downstream Ports - Connect your USB devices to these 4 ports.
5) USB Connector (A type) - Plug the USB Connector to an unused USB port on your
computer to provide a link between the USB hub and connected USB devices.
6) Battery Cover - Remove cover and insert four (4) rechargeable Ni-MH batteries that are
included in the package in order to use your Hub under Self-Power mode.
7) AC Power Adapter Connection - An AC Power Adapter (Output: 5V DC 2.6Amp) (Sold
separately. Please contact your original purchasing dealer and retailer) may be used as an
alternative to battery power when an AC wall outlet is available. Connect the USB Hub to
the optional AC Power Adapter. It will operate in Self-Power mode.
First Use - Charge BatteriesSelf-Power the Hub:
When using this Hub the first time, charge the Ni-MH batteries at least 6 hours.
1) Insert the included batteries (4) into the Hub.
2) Plug the USB connector into an unused USB port on your computer.
3) Make sure that the Battery Power Switch is in the OFF position and your computer is ON.
Batteries will be fully charged in approximately 6 hours.
Warning!
In order to maximize the battery powered hub as well as to avoid any unsafe situation,
please do not use dry battery and any other kinds of rechargeable battery!!
Installation
This USB Hub is a plug-and-play device. Your computer will display the ADD NEW
Hardware Wizard after connecting the hub to your computer. Installation may be done
whether your computer is powered on or off. It is not necessary to restart your computer
after installation.
1) Plug the USB Connector into an unused USB port on your computer.
2) Please use the included USB extension cable if the attached USB Connector is too short.
3) Connect your USB devices to the Downstream ports on the USB Hub.
Installation - continued
Self-Power the Hub:
Using Battery Power:
If the connected devices work properly, keep the Battery Power Switch OFF in order to
conserve battery power! If the connected devices function erratically or require additional
power, turn the Battery Power Switch ON to activate Self-Power mode.
Note:
Depending on the equipment being powered, your Mobile Battery Powered Hub’s
rechargeable Ni-MH battery have to be replaced or recharged at 3-5 hours of continuous use.
Appendix A
Troubleshooting
Problem
Unit operates Erratically.
USB devices operate
erratically or can’t be
powered on.
Unit fails to provide
Battery power
Unit fails to operate and
is not recognized by the
operating system.
Possible Cause
Static electricity may
cause the hub to behave
erratically.
Connected USB devices
may require too much
power for bus-powered
operatically.
Batteries may need
replacement.
Non-USB compliant
operating system.
Action
Reset the hub by disconnecting it
from your computer. Wait 5 seconds,
then reconnect it.
Set the Battery Power Switch to the
ON. position for Self-Power mode.
Replace batteries with standard
Ni-MH AAA rechargeable batteries.
Insure that your computer is fully
USB-compatible and a USB-
compliant operating system is
installed.(see System Requirements
section)
Appendix B
Radio & TV interference Statement
This equipment has been tested and found to comply within the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequence energy and if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. There is no guarantee, however, that interference will not occur in a
particular installation.
Appendix C
Product Limited liabilities Warranty
CyberPower warrantys this USB Hub (the Hub) that warranty period is 2 years after
purchasing date, any product defect, problem and etc. Please contact your original
purchasing dealer and retailer. They will provide you the service. If a defect results in product
failure during its normal use, CyberPower’s sole responsibility is to repair or replace(at its
sole option) the Hub.
To make a Limited Warranty claim:
1.Pack and ship the Hub to original purchasing dealer retailer.
2.Clearly indicate on the outside of the packaging that this is a WARRANTY RETURN;
3.Clearly include your name and address (a) on the outside packaging and (b) one photo
copy of original invoice or receipt enclosed in the box with the Hub that is being returned
4.You MUST prepay all shipping costs and you are responsible for packaging and shipment.
Contact Information:
You may also visit CyberPower on the Internet at eu.cyberpowersystems.com or
send E-mail to [email protected]
CyberPower Systems B.V.
E-mail : [email protected] web: eu.cyberpowersystems.com
Entire contents copyright©2005 CyberPower Systems, Inc.
All rights reserved. Reproduction in whole or in part without permission is prohibited.
K01-H420MP10