HP procurve 8000M User Manual

Download Operation & user’s manual of HP ProCurve 9304M Kitchen Appliances, Network Hardware for Free or View it Online on All-Guides.com.

HP ProCurve 9304M Operation & user’s manual - Page 1
1
HP ProCurve 9304M Operation & user’s manual - Page 2
2
HP ProCurve 9304M Operation & user’s manual - Page 3
3
HP ProCurve 9304M Operation & user’s manual - Page 4
4
HP ProCurve 9304M Operation & user’s manual - Page 5
5
HP ProCurve 9304M Operation & user’s manual - Page 6
6
HP ProCurve 9304M Operation & user’s manual - Page 7
7
HP ProCurve 9304M Operation & user’s manual - Page 8
8
Read Me First
for the
HP ProCurve Switch 8000M and Switch 1600M
Contents:
Software Updates Are
Free
!
Your
Free
Ticket to Proactive Networking
If You Receive a Disk with an HP ProCurve Switch Module
Errata and Updates for the
HP ProCurve Switches 1600M and 8000M Management and
Configuration Guide
Switch 8000M Power Supply Requirements
New Features for Software Release C.07.
XX
Software Updates Are
Free
!
Hewlett-Packard provides free software updates on the HP ProCurve website. To
automatically receive email notice of new updates for
all
managed ProCurve and
AdvanceStack networking products, just fill out and mail the postage-paid card
attached to the TopTools CD sleeve included with your switch. Look for the CD
sleeve with
Your Free Ticket to Proactive Networking
on the cover. (If you have
already mailed one of these cards for another HP networking product, it is not
necessary to send in the card again.)
To determine whether you have the latest software, and to access software updates on the web, go
to the ProCurve website at
http://www.hp.com/go/procurve
,
then click on
Support
and look for the link
to use for accessing and downloading software.
To Verify the Current Software Version in Your Switch.
The switch displays its current soft-
ware version as a
Firmware revision
number. (For example,
Firmware revision C.07.01
.) Use any of
the following to view this number:
Start a Console session. In the Console login screen (the first screen displayed), the
Firmware
revision
line under the switch name shows the software version.
If you are already displaying a Console menu, go to the Console Main menu and select
1. Status and Counters
1. General System Information
In the resulting display, the current software version is listed as the
Firmware revision
number.
In the web browser interface, click on the Identity tab. The current software version is listed
as the
revision
number in the
Version
line.
59692308.fm Page 1 Tuesday, May 4, 1999 6:00 PM