YAESU RF UTUNING KIT Operating Manual
Download Operating manual of Yaesu RF UTUNING KIT Other for Free or View it Online on All-Guides.com.
1
2
RF μTUNING KIT OPERATING MANUAL
Do not modify or change the μTUNE UNIT
Be Carefully to avoid miss-connections
3 Do not place the μTUNE UNIT on an unstable loca-
tion and where objects will fall onto it from above
Ensure adequate ventilation around the RF μTUNING
KIT
Do not stretch or pinch the cables
6 Do not apply any incorrect voltage to the μTUNE
UNIT
Do not install this apparatus in a location with exposure
to direct sunshine
Keep this equipment out of the reach of small children
Do not wipe the case with chemicals such as thinner or
benzene
ADVICE
The RF connecting cables are color coded
(black and gray) to assist in properly connect-
ing the RF IN and RF OUT jacks. (see illus-
tration)
Miss-connection will not damage the RF
μTUNING KIT. However, improper operation
may occur.
Connect the color-coded control cable(s) be-
tween the CNTL OUT and CNTL IN jacks (see
illustration). Confirm all connections before
turning on the transceiver.
If the FT-2000 does not operate and the fre-
quency display blinks sometimes, confirm and
correct the “CNTL IN” and “CNTL OUT” con-
nections.
The order of connecting multiple RF μTUN-
ING KITS is not important.
SINGLE CONNECTION
MULTI CONNECTION
NOTICE
ANT
~AC IN
µ-TUNE
FROM
RF OUT
RF IN
GND
CNTL IN
µ-TUNE
µ-TUNE TO
RF IN
RF OUT
RF IN
RF OUT
CNTL IN
CNTL OUT
CNTL IN
CNTL OUT
RF CABLE
(RF µTuning Kit )
の付属品
RF CABLE
(RF µTuning Kit )
の付属品
CNTL CABLE
(RF µTuning Kit )
の付属品
CNTL CABLE
(RF µTuning Kit )
の付属品
CNTL CABLE
(RF µTuning Kit )
の付属品
RF Cable
(Supplied with RF μTUNING KIT)
RF Cable (Supplied with RF TUNING KIT)
RF Cable
(Supplied with RF μTUNING KIT)
CNTL Cable
(Supplied with RF μTUNING KIT)
CNTL Cable
(Supplied with RF μTUNING KIT)
CNTL Cable (Supplied with RF μTUNING KIT)
RF Cable (Supplied with RF μTUNING KIT)
RF Cable (Supplied with RF μTUNING KIT)
Copyright 2006
VERTEX STANDARD CO., LTD.
All rights reserved
No portion of this manual
may be reproduced without
the permission of
VERTEX STANDARD CO., LTD.
Printed in Japan
INTERCONNECTIONS
(
PLEASE TURN OFF THE TRANSCEIVER BEFORE CONNECTING CABLES
)
Congratulations on your purchase of the YAESU RF μTUNING KIT.
This operating manual will help you discover the full capability of the RF ƒÊTUNING KIT. Please read this manual before beginning
installation of the Kit.
ANT
~AC IN
µ-TUNE
FROM
RF OUT
RF IN
GND
µ-TUNE
µ-TUNE TO
CNTL IN
RF CABLE
(RF µTuning Kit )
の付属品
RF CABLE
(RF µTuning Kit )
の付属品
CNTL CABLE
(RF µTuning Kit )
の付属品
CNTL Cable (Supplied with RF μTUNING KIT)
RF Cable (Supplied with RF μTUNING KIT)
RF Cable (Supplied with RF μTUNING KIT)
EAE97X720