YAESU PEP2000 - UPDATE V0152 AND V11.54 8-26-10 Update Manual

Download Update manual of Yaesu PEP2000 - UPDATE V0152 AND V11.54 8-26-10 Processor for Free or View it Online on All-Guides.com.

Yaesu PEP2000 - UPDATE V0152 AND V11.54 8-26-10 Update manual - Page 1
1
Yaesu PEP2000 - UPDATE V0152 AND V11.54 8-26-10 Update manual - Page 2
2
Yaesu PEP2000 - UPDATE V0152 AND V11.54 8-26-10 Update manual - Page 3
3
Yaesu PEP2000 - UPDATE V0152 AND V11.54 8-26-10 Update manual - Page 4
4
Yaesu PEP2000 - UPDATE V0152 AND V11.54 8-26-10 Update manual - Page 5
5
Yaesu PEP2000 - UPDATE V0152 AND V11.54 8-26-10 Update manual - Page 6
6
Yaesu PEP2000 - UPDATE V0152 AND V11.54 8-26-10 Update manual - Page 7
7
Yaesu PEP2000 - UPDATE V0152 AND V11.54 8-26-10 Update manual - Page 8
8
8/26/10
PEP2000
This procedure is used to update Main CPU Ver. 0152 and EDSP Ver. 11.54 the
flash programming for the FT-2000/D Transceivers.
We recommend installing the Flash Programming Software on a PC computer with Windows 2000,
XP or Vista Operating System; and use the CT-119 programming cable or 8-pin mini-DIN PGM-SW
(P0091526) and serial cable RS-232C, DB9F to DB9F straight cable.
NOTE: There are many USB adapters available; however some may not function with this software.
We recommend using the latest USB adapter driver software when available.
If the CT-119 programming cable or is not available you will need a RS-232C, DB9F to DB9F
straight cable and 8pin mini-DIN PGM-SW (P0091526). If the DIN PGM-SW is not available you
will need to operate the internal program switch S3004. Please follow the instructions in
ADDENDUM: Page 7 and 9.
The software versions can be displayed on the radio
While holding the three buttons [GEN][50][ENT] turn the radio on. The software version will be
displayed in the VFO-A window for 5 seconds then the radio will start up in normal operation.
See below:
Example EDSP V11.53 and MAIN V0150 software version.
*If you already have EDSP V11.54 and MAIN V0152 software versions, it is not necessary to update the FT-
2000/D again.
The software updates will work with all versions (AF, AS, EU, NA, OC, SA or all Countries) of the
FT-2000 and FT-2000D.
The update software is available from our website at http://www.yaesu.com. The CT-119
programming cable is available from your authorized Vertex Standard dealer. You may also order
by email to Vertex Standard parts department, [email protected]om
.
Main CPU:
Software version 01
XX
(This image & version is for
illustration only)
EDSP:
Software version 11.XX
(This image & version is for
illustration only)