YAESU FTDX5000 - SOFTWARE UPDATE INFORMATION 1-10-11 Update Manual

Download Update manual of Yaesu FTDX5000 - SOFTWARE UPDATE INFORMATION 1-10-11 Software for Free or View it Online on All-Guides.com.

Yaesu FTDX5000 - SOFTWARE UPDATE INFORMATION 1-10-11 Update manual - Page 1
1
Yaesu FTDX5000 - SOFTWARE UPDATE INFORMATION 1-10-11 Update manual - Page 2
2
Yaesu FTDX5000 - SOFTWARE UPDATE INFORMATION 1-10-11 Update manual - Page 3
3
Yaesu FTDX5000 - SOFTWARE UPDATE INFORMATION 1-10-11 Update manual - Page 4
4
Yaesu FTDX5000 - SOFTWARE UPDATE INFORMATION 1-10-11 Update manual - Page 5
5
Yaesu FTDX5000 - SOFTWARE UPDATE INFORMATION 1-10-11 Update manual - Page 6
6
Yaesu FTDX5000 - SOFTWARE UPDATE INFORMATION 1-10-11 Update manual - Page 7
7
Yaesu FTDX5000 - SOFTWARE UPDATE INFORMATION 1-10-11 Update manual - Page 8
8
Yaesu FTDX5000 - SOFTWARE UPDATE INFORMATION 1-10-11 Update manual - Page 9
9
Yaesu FTDX5000 - SOFTWARE UPDATE INFORMATION 1-10-11 Update manual - Page 10
10
1/10/11
FTDX5000 Software Update and Version
Identification
There are four different Software installations. Each one must be followed carefully. Installing the
wrong type software may cause difficulties. Check your radio before installing software to be sure
which updates are needed.
If multiple software installations are required the MAIN software should be installed first, as it is the
only one that requires a hard reset (FAST+LOCK).
The latest versions are listed below with the release dates.
MAIN Software Version 0113 (1/10/11)
EDSP Software Version 0529 (12/17/10)
OEL (OLED) Software Version 0110 (3/23/10)
SM-5000 Software Version 0107 (3/23/10)
DMU-2000 Software Version (Option): Please refer to the DMU-2000 update information on our
website.
EDSP-5000 Programming Writer Version 1.07 (7/09/10)
Implements improvements
Main Ver. 0113 (1/10/11)
Reduce power off noise from the SM-5000 speaker
EDSP Ver. 0529 (12/17/10)
Correct the lock up problem when setting the RX DSP Filter to “SOFT” and the manual Notch
Filter to ON at the same time. (Default setting is “SHARP”)
EDSP-5000 Ver. 1.07 (7/09/10)
Extended writer time out.
We recommend: if you have any previous EDSP 5000 programming writer on your computer, that
you delete this before using the EDSP-5000 Ver. 1.07. Always use the latest version writer.