Yamaha DSP-A1092 Owner's Manual
Download Owner's manual of Yamaha DSP-A1092 Amplifier, Stereo Receiver for Free or View it Online on All-Guides.com.
Brand: Yamaha
Category: Amplifier , Stereo Receiver
Type: Owner's manual for Yamaha DSP-A1092
Pages: 71 (0.79 Mb)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
41
English
Regardless of the setting of input selector buttons, when you set
the REC OUT selector to a position other than “SOURCE”, the
source selected by the REC OUT selector can be recorded by other
tape deck (MD recorder) and/or VCRs connected to this unit.
While recording a source by setting the REC OUT selector to the
position other than SOURCE as described above, the following
operations can be made at the same time.
●
You can monitor the audio (or the audio and video) signals being
recorded by selecting the recording unit (TAPE (MD), VCR 1 or
VCR 2) with the corresponding input selector button.
●
You can watch or listen to any other source by selecting it with the
corresponding input selector button.
NOTE: Adjusting the master VOLUME, BASS, TREBLE controls,
etc., or selecting a sound field program has no effect on the material
being recorded.
NOTE: Composite video and S video signals pass independently
through this unit’s video circuits. Therefore, when recording or
dubbing video signals, if your video source unit is connected to
provide only a S video (or only a composite video) signal, you can
record only a S video (or only a composite video) signal on your
VCR.
NOTE: A source that is connected to this unit between digital jacks
only cannot be recorded by a tape deck or VCR connected to this
unit.
NOTE: Please check the copyright laws in your country to record
from records, compact discs, radio, etc. Recording of copyright
material may infringe copyright laws.
If you watch a video software that uses scramble or
encoded signals to prevent it from being dubbed, there may
be a case that display information superimposed on the
picture and/or the picture itself is disturbed due to those
signals.