AEG-ELECTROLUX ERC3700 Instruction Booklet

Download Instruction booklet of AEG Electrolux ERC3200 Refrigerator for Free or View it Online on All-Guides.com.

AEG Electrolux ERC3200 Instruction booklet - Page 1
1
AEG Electrolux ERC3200 Instruction booklet - Page 2
2
AEG Electrolux ERC3200 Instruction booklet - Page 3
3
AEG Electrolux ERC3200 Instruction booklet - Page 4
4
AEG Electrolux ERC3200 Instruction booklet - Page 5
5
AEG Electrolux ERC3200 Instruction booklet - Page 6
6
AEG Electrolux ERC3200 Instruction booklet - Page 7
7
AEG Electrolux ERC3200 Instruction booklet - Page 8
8
AEG Electrolux ERC3200 Instruction booklet - Page 9
9
AEG Electrolux ERC3200 Instruction booklet - Page 10
10
AEG Electrolux ERC3200 Instruction booklet - Page 11
11
AEG Electrolux ERC3200 Instruction booklet - Page 12
12
11
Electrolux 818 19 39--00/3
Door Reversal
1. C lose the cabinet and remove the plug from the
electrical socket.
2. Remove the ventilation grille. There is a part on
the grille that can be removed. Reposition it and put
it on the other side.
3. Put the cabinet on a wooden board when it is laid
down. Later, when raising the cabinet, it will be
easier to grip under the cabinet thanks to the board.
4. On the upper part of the cabinet. Put the hinge pin
on the other side.
5. On the lower part of the cabinet.
a Unscrew the hinge.
b Remove the door-closing fittings from the hinge
and put the hinge pin on the other side. Then attach
the supplied door-closing fitting.
6. a. Remove the door-closing fitting from the
bottom of the door.
b. Remove the plastic plug from the corresponding
hole on the other side. Use a screwdriver to rock the
plug loose. Then secure the supplied door-closing
fitting.
c. Secure the lower hinge.
Remove any play in the door by adjusting the height
of the lower hinge with the supplied spanner. Secure
with the lock-nut.
7. Raise the cabinet and replace the ventilation grille.
8. To transfer the handle.
Unscrew the screws. Fit the handle onto the opposite
side by turning it one half circle.
9. Put the cabinet in position. Check that it stands
straight. See the section "Positioning the cabinet".
Electrical connection
Connect the cabinet to a grounded electrical outlet.
Voltage: 230 V.
Fuse: 10 A.
Refer t o the rating plate on the left inside the
cabinet.
1
2
3
4
5a
5b
a
b
c
6
8