Danby APAC9036 Owner's Manual

Download Owner's manual of Danby APAC9036 Dehumidifier for Free or View it Online on All-Guides.com. This version of Danby APAC9036 Manual compatible with such list of devices, as: APAC9036, APAC9036 EFOM, DPAC11006, DPAC120060

Danby APAC9036 Owner's manual - Page 1
1
Danby APAC9036 Owner's manual - Page 2
2
Danby APAC9036 Owner's manual - Page 3
3
Danby APAC9036 Owner's manual - Page 4
4
Danby APAC9036 Owner's manual - Page 5
5
Danby APAC9036 Owner's manual - Page 6
6
Danby APAC9036 Owner's manual - Page 7
7
Danby APAC9036 Owner's manual - Page 8
8
Danby APAC9036 Owner's manual - Page 9
9
Danby APAC9036 Owner's manual - Page 10
10
Danby APAC9036 Owner's manual - Page 11
11
Danby APAC9036 Owner's manual - Page 12
12
Danby APAC9036 Owner's manual - Page 13
13
Danby APAC9036 Owner's manual - Page 14
14
Danby APAC9036 Owner's manual - Page 15
15
Danby APAC9036 Owner's manual - Page 16
16
Danby APAC9036 Owner's manual - Page 17
17
Danby APAC9036 Owner's manual - Page 18
18
Danby APAC9036 Owner's manual - Page 19
19
Danby APAC9036 Owner's manual - Page 20
20
Danby APAC9036 Owner's manual - Page 21
21
Danby APAC9036 Owner's manual - Page 22
22
Danby APAC9036 Owner's manual - Page 23
23
Danby APAC9036 Owner's manual - Page 24
24
34F
Directives d’utilisation du ventilateur :
REMARQUE : L’installation des boyaux
d’échappement n’est pas requise pour le
fonctionnement en mode de ventilation
seulement.
Le réservoir d’eau externe n’est pas requis
pour le fonctionnement en mode de
ventilation seulement.
1.Appuyer sur la touche I/O (en marche / arrêt) pour
activer l’unitéFig H.
2.Appuyer sur la touche MODE jusqu’à l’affichage
du symbole « Ventilateur ») sur l’écran. Chaque
dépression sur la touche MODE avancera
l’affichage à un réglage de mode différent (Frais –
Sec – Ventilateur) Fig H.
3.Appuyer sur la touche VENTILATEUR pour choisir
la VITESSE DE VENTILATEUR désirée Fig I.
Chaque dépression sur la touche VENTILATEUR
avancera l’affichage à un réglage de vitesse
différente (Basse – Moyenne – Haute).
4.Appuyer sur la touche OSCILLATION pour activer
la fonction d’oscillation automatique de l’air (le
symbole « oscillation d’air » apparaîtra sur
l’affichage) Fig J. Pour désactiver la fonction
d’oscillation d’air, appuyer sur la touche
OSCILLATION de nouveau.
5.Pour régler la direction du débit d’air (haut / bas
seulement), régler les lamelles horizontales du
centre et les autres lamelles seront
automatiquement réglées à la même position. Fig. 25.
Fig. 25
Fig H
Fig I
Fig J
Setting TIME OF DAY (Clock) Instructions:
NOTE: This is a 24:00 hour clock system
Push and hold the CLOCK (TIMER ON / TIMER OFF) key
pads simultaneously Fig A. The clock symbol appears in the
display and the minute “00” digits start flashing Fig C. Press
the TEMP/TIMER buttons Fig B until the correct time
(in minutes) is displayed. Press either of the clock (TIMER ON
/ TIMER OFF) buttons. The hour “0” digit start flashing. Press
the TEMP/TIMER buttons until the correct (hour) time
is displayed. When the correct time appears in the display,
press the CLOCK (TIMER ON / TIMER OFF) key pads
simultaneously. The colons (:) between the hour and
minutes start flashing indicating the time of day is now set.
Important Note: Any interruption to the electrical
power supply will automatically cancel the TIME
OF DAY clock program. In the event this should
happen, you will be required to re-set the
clock program.
Operating Instructions (Air Conditioning):
NOTE: Both exhaust hoses must be installed and
properly vented (outdoors) during air conditioning
mode.
1) Press the I/O (on/off) key pad to switch on the
unit. Fig D.
2) Press the MODE key until the COOL symbol
appears in the display window Fig E. Each
.....depression of the MODE key will advance to a
.....different mode setting (Auto-Cool-Dry-Fan).
3) Press the appropriate (TEMP / TIMER/ADJ)
keys to select a suitable operating temperature
setting Fig B. Temperature settings are
adjustable between 16°C (61°F) to 31°C (88°F ).
The set temperature will flash in the display
window for approximately 5 seconds then
automatically revert back to display actual room
ambient temperature conditions. NOTE: The set
operating temperature must be programmed
within the 5 second (temperature flashing)
condition. To view the “set” temperature any time,
press either of the TEMP/TIMER ADJ buttons.
The blue indicator light will come on indicating the
air conditioning mode is operational (there may be
a slight delay of 10-30 seconds before the cycle
begins, this is normal).
9
Fig E
Fig B
Fig A
Fig C
Fig D