• Home
• Brands
• Datalogic Manuals
• Datalogic SKORPIO Multi-Battery Charger
• Datalogic SKORPIO Multi-Battery Charger Specifications

Datalogic SKORPIO Multi-Battery Charger Specifications

Download Quick start manual of Datalogic SKORPIO Multi-Battery Charger Battery Charger for Free or View it Online on All-Guides.com.

1

DATALOGIC SKORPIO™

MULTI-BATTERY CHARGER

Figure 1

The Datalogic Skorpio™ Multi-Battery Charger, with its 4 slots,

allows you to charge the Datalogic Skorpio™ and Datalogic

Skorpio-GUN™ battery packs.

TECHNICAL FEATURES

ELECTRICAL

Power supply 12-14 VDC

Max consumption 4 A

Charge time

3 h 30 min Skorpio™

5 h min Skorpio-GUN™

PHYSICAL

Dimensions (LxWxH) 20 x 13.7 x 4.3 cm

(7.9 x 5.4 x 1.7 in)

Weight (without batteries) 687 g (24.2 oz)

LEDs 4 Charger Status LEDs

1 Power on LED

ENVIRONMENTAL

Working temperature 0° to +40 °C (+32° to +104 °F)

Storage temperature -20° to +70 °C (-4° to +158 °F)

Humidity 95% without condensation

Degree of protection IP30

CONNECTIONS

Plug the power supply into the connector positioned on the

Datalogic Skorpio™ Multi-Battery Charger base. Then plug the

power supply into a socket.

Figure 2

ACCESSORIES

94ACC4595 FPS18 power supply without power cord

94ACC1150 Power cord EU 3- pin

USING DATALOGIC SKORPIO™ MULTI-BATTERY CHARGER

Charge Function

Correctly insert the battery pack of the Datalogic Skorpio™ or

of the Datalogic Skoprio-GUN™ into one of the free slots:

simply press it into the slot until the battery latch is

automatically closed; charging starts automatically.

Figure 3

To remove the battery pack release the latch on the charger

for the Datalogic Skorpio™ and the latch on the gun battery

pack for the Datalogic Skorpio-GUN™ as indicated in figure 4:

Figure 4

Battery Charging Status LED Description

LED Status

Power Green It is constant when the

battery charger is powered

Charger Green Empty slot

Red Charging

Green Charge completed

Orange blinking Error

COMPLIANCE

FCC Compliance

Modifications or changes to this equipment without the

expressed written approval of Datalogic could void the

authority to use the equipment.

This device complies with PART 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device

must accept any interference received, including interference

which may cause undesired operation.

This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is

operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the

user will be required to correct the interference at his own

expense.

822000761 (Rev. B)

Battery Charging State LEDs

Power on LED