Davis SensorLink Install Manual

Download Installation manual of DAVIS SensorLink Battery Charger for Free or View it Online on All-Guides.com.

Brand: DAVIS

Category: Battery Charger

Type: Installation manual for DAVIS SensorLink

Pages: 12 (0.24 Mb)

Download DAVIS SensorLink Installation manual

DAVIS SensorLink Installation manual - Page 1
1
DAVIS SensorLink Installation manual - Page 2
2
DAVIS SensorLink Installation manual - Page 3
3
DAVIS SensorLink Installation manual - Page 4
4
DAVIS SensorLink Installation manual - Page 5
5
DAVIS SensorLink Installation manual - Page 6
6
DAVIS SensorLink Installation manual - Page 7
7
DAVIS SensorLink Installation manual - Page 8
8
DAVIS SensorLink Installation manual - Page 9
9
DAVIS SensorLink Installation manual - Page 10
10
DAVIS SensorLink Installation manual - Page 11
11
DAVIS SensorLink Installation manual - Page 12
12
Product # 7610 & 7611
S
ENSOR
L
INK
I
NSTALLATION
M
ANUAL
The SensorLink Transmitter (#7610) and SensorLink Receiver (#7611) are
designed to work with Davis Instruments’ Weather Monitor II
®
and the
Weather Wizard III
®
to enable wireless transmission of data between the sen-
sors and console up to 400 feet (120 m). The SensorLink Transmitter/Receiver
pair takes the place of the junction box and cable that would normally connect
the outdoor sensors to the display console. The outdoor sensors connect to the
transmitter while the display console connects to the receiver.
One transmitter can send data to any number of Monitor II or Wizard III con-
soles, providing the console contains an receiver. The transmitter/receiver
communicate on one of 8 different ID codes set by the user. This allows multi-
ple systems to coexist in the same geographical area.
Note:
SensorLink operates on a low power frequency that does not require an FCC license.
C
OMPONENTS
The SensorLink package includes the following. Please make sure you have
everything you need before beginning.
Receiver
Transmitter
#6 x 1" (25 mm long)
Self-Threading Screws
Cable Ties
3 Volt
Lithium
Transmitter
Battery
Power Adapter
Adhesive Pads
(not used)
RECEIVER COMPONENT
TRANSMITTER COMPONENTS