Davis Rain Collector II Install Manual

Download Installation manual of DAVIS Rain Collector II Weather Station for Free or View it Online on All-Guides.com.

Brand: DAVIS

Category: Weather Station

Type: Installation manual for DAVIS Rain Collector II

Pages: 16 (0.27 Mb)

Download DAVIS Rain Collector II Installation manual

DAVIS Rain Collector II Installation manual - Page 1
1
DAVIS Rain Collector II Installation manual - Page 2
2
DAVIS Rain Collector II Installation manual - Page 3
3
DAVIS Rain Collector II Installation manual - Page 4
4
DAVIS Rain Collector II Installation manual - Page 5
5
DAVIS Rain Collector II Installation manual - Page 6
6
DAVIS Rain Collector II Installation manual - Page 7
7
DAVIS Rain Collector II Installation manual - Page 8
8
DAVIS Rain Collector II Installation manual - Page 9
9
DAVIS Rain Collector II Installation manual - Page 10
10
DAVIS Rain Collector II Installation manual - Page 11
11
DAVIS Rain Collector II Installation manual - Page 12
12
DAVIS Rain Collector II Installation manual - Page 13
13
DAVIS Rain Collector II Installation manual - Page 14
14
DAVIS Rain Collector II Installation manual - Page 15
15
DAVIS Rain Collector II Installation manual - Page 16
16
Rain Collector II
Installation manual
This instruction manual takes you step-by-step through the procedures required to
install the Rain Collector II. The Rain Collector II is designed for use with any of
Davis’ weather stations (with the exception of the Perception II
®
Station). Each station
can display rainfall in either inches or millimeters. Instructions for displaying rainfall
on the Weather Wizard III
®
and Weather Monitor II
®
are also included in this manual.
Components
The Rain Collector II includes the following components. Please make sure you have
all listed components before continuing.
Rain Collector with Cable — The rain collector comes with the cone attached to the
base and has a 40’ (12m) cable.
Four #8 x 3/4" Screws
Debris Screen — This screen is placed into the rain collector cone to help prevent
debris from clogging the funnel hole.
Metric Rain Adapter — This adapter adds weight to the tipping mechanism, adjusting
it to tip for every 0.2 mm of rainfall instead of every 0.01”.