DBX DriveRack 4800 Applications

Download Specifications of dbx DriveRack 4800 Musical Instrument, Stereo Equalizer for Free or View it Online on All-Guides.com.

dbx DriveRack 4800 Specifications - Page 1
1
dbx DriveRack 4800 Specifications - Page 2
2
DriveRack
®
4800 & 4820 Specifications
CONTROL
DATA
MESSAGING SERVICES
AUDIO CONTROL ASYNCHRONOUS CONTROL
AUDIO SERVICES PACKET SERVICES
PHYSICAL MEDIUM
STREAMING AUDIO
18-0362
www.dbxpro.com
INPUTS AND OUTPUTS
Analog Inputs: (4)
Connectors: Female XLR
Type: Electronically balanced, RF filtered
Impedance: >50k ohms
Maximum Software selectable for: +28, +26, +24,
Input Level +22, +20, +18, +16, +14 dBu
CMRR: >40 dB typical, >55 dB at 1 kHz
Digital Inputs: (4) AES/EBU Channels
Connectors: Female XLR
Type: Transformer Isolated, RF filtered
Impedance: 110 ohms
RTA Input: (1) Analog
Connectors: Female XLR
Gain range: 20 dB to 50 dB in 10 dB increments
Analog Outputs: (8)
Connectors: Male XLR
Type: Electronically balanced, RF filtered
Impedance: 30 ohms
Max Output Level: Software selectable for: +24, +22, +20,
+12, +8, +4 dBu
Digital Outputs: (8) AES/EBU Channels
Connectors: Male XLR
Type: Transformer Isolated, RF filtered
Impedance: 110 ohms
A/D PERFORMANCE
Type: dbx Type IV
Conversion System
Dynamic Range: 113 dB unweighted, 116 dB A-weighted
Type IV™: 126 dB with transient material,
dynamic range A-weighted, 22 kHz BW
123 dB with transient material,
unweighted, 22 kHz BW
118 dB typical with program material,
A-weighted, 22 kHz BW
Sample Rate: 96 kHz or 48 kHz
A/D Wordlength: 24 bits
D/A PERFORMANCE
Dynamic Range: 112 dB unweighted, 115 dB A-weighted
Sample Rate: 96 kHz or 48 kHz
D/A Wordlength: 24 bits
SYSTEM PERFORMANCE
Dynamic Range: 110 dB unweighted, 113 dB A-weighted
Internal Processing: 32 bit floating point
THD + Noise: 0.004% typical at +4 dBu, 1 kHz,
0 dB input gain
Frequency 20 Hz- 20 kHz,
±0.25 dB, <10
Response: Hz- 50 kHz +0/
-
3dB @ 96kHz
Interchannel Crosstalk: <
-
85 dB at 1 kHz, 0 dB input gain
PROCESSING
Pre EQ Type: (1) 31-band Graphic EQ on each input;
(1) graphic EQ switchable between 31-band
and 9-band Parametric on each input
Range:
±15 dB
Input Insert (2) selectable Insert Processing
Processing: Blocks per input
Type: Noise Gate, Compressor, Auto Gain Control,
De-Esser, Sub-Harmonic Synth, Notch filters
and Advanced Feedback Suppression
Input Delay: Up to 680 mSec available
Routing/Mixing: 4-input mixer available at each input and
output allowing any input to be sent or mixed
to any output
Output Insert (2) selectable Insert Processing blocks per
Processing: output
Type: Noise Gate, AutoWarmth
®
, Compressor, Auto
Gain Control, Peak Limiter, Sub-Harmonic Synth
X-Over Filter 1x1, 1x2, 1x3, 1x4, 1x5, 1x6, 1x7, 1x8, 2x2,
Configurations 2x3, 2x4, 2x5, 2x6, 2x7, 2x8, 3x3, 3x4, 3x6,
3x7, 4x4, 4x8
Types: Bessel 6, 12, 18, 24, 36 and 48 dB/Octave
Butterworth 6, 12, 18, 24, 36 & 48 dB/Octave
Linkwitz-Riley 12, 24, 36, and 48 dB/Octave
Polarity: Positive and Negative
Phase Control: to
-
180˚ in increments
Output EQ Type: (1) 6-band Parametric on each output
Output Delay: 1365 mSec shared between the outputs
MISCELLANEOUS:
I/O Transformers: Optional Jensen
JT-11 & JT-123-dbx
CobraNet
®
I/O: Optional
Control: Ethernet, RS-232, Optional dbx ZC Wall Panels
Power: 100V to 240V 50/60Hz, 35 Watts
Dimensions: 3.5” x 19” x 12.15”
Weight: 11 lbs. (14 lbs. w/audio transformers)
Shipping Weight: 12.5 lbs. (15.5 lbs. w/audio transformers)
dbx Professional Products 8760 South Sandy Parkway Sandy UT 84070 Phone 801.568.7660
Fax 801.568.7662 Int’l Fax 801.568.7583 • email: customer@dbxpro.com www.dbxpro.com
DriveRack 4800 front panel
DriveRack 4820 front panel
DriveRack 4800 and 4820 rear panel
©2005 dbx Professional, All Rights Reserved. All specifications are subject to change. dbx and
HiQNet are trademarks of Harman International. All other trademarks are the properties of
their respective holders.
Hardware Architecture Employing industry standard networking
technologies, HiQnet™ hardware is ready to be integrated into any system. By using Ethernet
as its main interface, HiQnet™ assures that products will operate within existing and new
infrastructures and provides all the remote access, connectivity, and control required.
Software Architecture Far more
than just a messaging protocol, HiQnet™ is a software
architecture for real-time control and monitoring com-
bined with streamed audio. e HiQnet™ architecture
is truly the first to allow the system not to be tied to an
underlying physical medium. Whether a simple RS232
control command or fully streamed CobraNet audio and
HiQnet™ control over Ethernet, our architecture is flexible
enough to handle any situation.
System Applications e range of
HiQnet™-compatible devices offers previously unattain-
able benefits in diverse real-world systems:
Live sound
Commercial installation
Engineered installation
Broadcast
Portable PA
HiQnet
compatible devices
AKG
®
WMS 4000 wireless microphone system
BSS
®
Soundweb
London networked audio
distribution system
Crown
®
I-Tech
tour sound amplifier range
Crown
®
amplifier PIP modules – PIP Lite,
USP3, USP3/CN
dbx
®
DriveRack
®
4800 / 4820 networked
loudspeaker management processors
JBL
®
VerTec
®
DP Series with DrivePack
technology intelligent networked amplified
loudspeakers
Studer
®
Vista 8 high-end theatre / install
digital console
4800/4820 DriveRack
®
Family
Complete Equalization and Loudspeaker Management System
System Architecture