AGA EC Owners Manual
Download Owner's manual of AGA EC Cooktop, Kitchen Appliances for Free or View it Online on All-Guides.com.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
OPERATING THE AGA
Controls:- located behind the top left hand door
Fig. 14 DESN 515283
14
Switch on the AGA’s electricity supply.
Turn the right hand control knob from the OFF setting to the Normal manual control setting.The cooker will heat up until
it reaches its Normal operating temperature which is set by the temperature control knob. (Turn clockwise to increase
temperature).
To obtain the required Normal roasting oven temperature, the control knob will need to be set just above halfway.
After several hours the heat indicator on the AIMS handset should be within the black band (See Fig. 15). It maybe
necessary to adjust the temperature control knob to achieve this. Always allow the cooker to stabilise for 4 hours before
attempting any further adjustment.
When the heat indicator is within the black band, the cooker is at correct working temperature. The purpose of the heat
indicator is to show whether the cooker contains the full amount of stored heat when the cooker is in normal operational
mode.
Fig. 15
DESN 515934
BLACK BAND - CORRECT
AMOUNT OF STORED HEAT
HEAT INDICATOR