AGA AIMS EC Owners Manual

Download Owner's manual of AGA EC Cooktop, Kitchen Appliances for Free or View it Online on All-Guides.com. This version of AGA EC Manual compatible with such list of devices, as: EC, EE, AIMS EC, AIMS EE

Brand: AGA

Category: Cooktop , Kitchen Appliances

Type: Owner's manual

Model: AGA EC , AGA EE , AGA AIMS EC , AGA AIMS EE

Pages: 24 (0.68 Mb)

Download AGA EC Owner's manual

AGA EC Owner's manual - Page 1
1
AGA EC Owner's manual - Page 2
2
AGA EC Owner's manual - Page 3
3
AGA EC Owner's manual - Page 4
4
AGA EC Owner's manual - Page 5
5
AGA EC Owner's manual - Page 6
6
AGA EC Owner's manual - Page 7
7
AGA EC Owner's manual - Page 8
8
AGA EC Owner's manual - Page 9
9
AGA EC Owner's manual - Page 10
10
AGA EC Owner's manual - Page 11
11
AGA EC Owner's manual - Page 12
12
AGA EC Owner's manual - Page 13
13
AGA EC Owner's manual - Page 14
14
AGA EC Owner's manual - Page 15
15
AGA EC Owner's manual - Page 16
16
AGA EC Owner's manual - Page 17
17
AGA EC Owner's manual - Page 18
18
AGA EC Owner's manual - Page 19
19
AGA EC Owner's manual - Page 20
20
AGA EC Owner's manual - Page 21
21
AGA EC Owner's manual - Page 22
22
AGA EC Owner's manual - Page 23
23
AGA EC Owner's manual - Page 24
24
AIMS (AGA INTELLIGENT MANAGEMENT SYSTEM)
17
AIMS SET-UP (SEE FIG. 16)
Fig. 16 DESN 515283
CONTROLS
1. Connect the electricity supply.
2. Turn the right hand control knob from the OFF setting to the normal manual control setting. The cooker will heat
up until it reaches the normal temperature as indicated by the black line on the heat indicator.
3. The left hand control knob will alter the oven temperature. Turn it clockwise to increase the temperature and anti-
clockwise to decrease the temperature.
To obtain the required roasting oven temperature of 240°C this control knob will need to be set about halfway. We
recommend that the cooker is run on the Normal manual setting for two days, before switching to AIMS (automatic
control).
4. When the normal temperature has been set with heat indicator on or near the black line, it should not be necessary
to alter the temperature control again.
5. The cooker can now be switched to AIMS (automatic control), by turning the right hand control knob from the
setting to the AIMS setting.
6. The AIMS hand set can then be used to programme the required settings (see AIMS (automatic) control instructions.