AGA 100 G FSD Users Manual

Download Operation & user’s manual of AGA 100 G FSD Kitchen Appliances for Free or View it Online on All-Guides.com.

Brand: AGA

Category: Kitchen Appliances

Type: Operation & user’s manual for AGA 100 G FSD

Pages: 44 (1.62 Mb)

Download AGA 100 G FSD Operation & user’s manual

AGA 100 G FSD Operation & user’s manual - Page 1
1
AGA 100 G FSD Operation & user’s manual - Page 2
2
AGA 100 G FSD Operation & user’s manual - Page 3
3
AGA 100 G FSD Operation & user’s manual - Page 4
4
AGA 100 G FSD Operation & user’s manual - Page 5
5
AGA 100 G FSD Operation & user’s manual - Page 6
6
AGA 100 G FSD Operation & user’s manual - Page 7
7
AGA 100 G FSD Operation & user’s manual - Page 8
8
AGA 100 G FSD Operation & user’s manual - Page 9
9
AGA 100 G FSD Operation & user’s manual - Page 10
10
AGA 100 G FSD Operation & user’s manual - Page 11
11
AGA 100 G FSD Operation & user’s manual - Page 12
12
AGA 100 G FSD Operation & user’s manual - Page 13
13
AGA 100 G FSD Operation & user’s manual - Page 14
14
AGA 100 G FSD Operation & user’s manual - Page 15
15
AGA 100 G FSD Operation & user’s manual - Page 16
16
AGA 100 G FSD Operation & user’s manual - Page 17
17
AGA 100 G FSD Operation & user’s manual - Page 18
18
AGA 100 G FSD Operation & user’s manual - Page 19
19
AGA 100 G FSD Operation & user’s manual - Page 20
20
AGA 100 G FSD Operation & user’s manual - Page 21
21
AGA 100 G FSD Operation & user’s manual - Page 22
22
AGA 100 G FSD Operation & user’s manual - Page 23
23
AGA 100 G FSD Operation & user’s manual - Page 24
24
AGA 100 G FSD Operation & user’s manual - Page 25
25
AGA 100 G FSD Operation & user’s manual - Page 26
26
AGA 100 G FSD Operation & user’s manual - Page 27
27
AGA 100 G FSD Operation & user’s manual - Page 28
28
AGA 100 G FSD Operation & user’s manual - Page 29
29
AGA 100 G FSD Operation & user’s manual - Page 30
30
AGA 100 G FSD Operation & user’s manual - Page 31
31
AGA 100 G FSD Operation & user’s manual - Page 32
32
AGA 100 G FSD Operation & user’s manual - Page 33
33
AGA 100 G FSD Operation & user’s manual - Page 34
34
AGA 100 G FSD Operation & user’s manual - Page 35
35
AGA 100 G FSD Operation & user’s manual - Page 36
36
AGA 100 G FSD Operation & user’s manual - Page 37
37
AGA 100 G FSD Operation & user’s manual - Page 38
38
AGA 100 G FSD Operation & user’s manual - Page 39
39
AGA 100 G FSD Operation & user’s manual - Page 40
40
AGA 100 G FSD Operation & user’s manual - Page 41
41
AGA 100 G FSD Operation & user’s manual - Page 42
42
AGA 100 G FSD Operation & user’s manual - Page 43
43
AGA 100 G FSD Operation & user’s manual - Page 44
44
When the cooker is level and in the correct position, the
two feet at the front corners of the cooker MUST be
lowered to come into contact with the floor and support the
cooker (tighten the locknuts). The two front mobility
wheels must then be raised by at least one turn (anti-
clockwise of the adjusting screw) to ensure that the
cooker is locked in place and cannot accidentally roll out
of position.
Conversion to LP
If the appliance is to be converted to LP gas do the
conversion at this point. See the conversion section of
these instructions.
Fitting the splashback (optional)
To fit the splashback, the appliance must be moved out
slightly to gain access to the rear of the appliance.
Remove 4 screws as shown.
Fit new splashback as shown.
Gas Connection
Fitting a stability bracket
A stability bracket or chain (not supplied with the cooker)
should be fitted when the cooker is connected to a flexible
gas supply. Any restraining device should be secured to
the fabric of the building and should be able to be released
so that the cooker can be pulled out for cleaning and
maintenance.
When fitting a stability bracket read these instructions
together with the leaflet supplied with the bracket.
a. Position and level the appliance.
b. Draw a pencil line along the front edge of the base of
the cooker and along the right hand edge.
c. Remove the range.
d. Mark off 495mm from the RH side of the unit to indicate
the centre line for the bracket.
e. Mark off 415mm to locate the front edge of the lower
bracket. Fix bracket to floor.
f. Measure the height from floor level to the bottom of the
opening in the cooker back.
Add 3mm to this dimension and assemble the stability
bracket to this height (i.e. from floor level to underside of
top member).
31