AGA 100 G FSD Users Manual

Download Operation & user’s manual of AGA 100 G FSD Kitchen Appliances for Free or View it Online on All-Guides.com.

Brand: AGA

Category: Kitchen Appliances

Type: Operation & user’s manual for AGA 100 G FSD

Pages: 44 (1.62 Mb)

Download AGA 100 G FSD Operation & user’s manual

AGA 100 G FSD Operation & user’s manual - Page 1
1
AGA 100 G FSD Operation & user’s manual - Page 2
2
AGA 100 G FSD Operation & user’s manual - Page 3
3
AGA 100 G FSD Operation & user’s manual - Page 4
4
AGA 100 G FSD Operation & user’s manual - Page 5
5
AGA 100 G FSD Operation & user’s manual - Page 6
6
AGA 100 G FSD Operation & user’s manual - Page 7
7
AGA 100 G FSD Operation & user’s manual - Page 8
8
AGA 100 G FSD Operation & user’s manual - Page 9
9
AGA 100 G FSD Operation & user’s manual - Page 10
10
AGA 100 G FSD Operation & user’s manual - Page 11
11
AGA 100 G FSD Operation & user’s manual - Page 12
12
AGA 100 G FSD Operation & user’s manual - Page 13
13
AGA 100 G FSD Operation & user’s manual - Page 14
14
AGA 100 G FSD Operation & user’s manual - Page 15
15
AGA 100 G FSD Operation & user’s manual - Page 16
16
AGA 100 G FSD Operation & user’s manual - Page 17
17
AGA 100 G FSD Operation & user’s manual - Page 18
18
AGA 100 G FSD Operation & user’s manual - Page 19
19
AGA 100 G FSD Operation & user’s manual - Page 20
20
AGA 100 G FSD Operation & user’s manual - Page 21
21
AGA 100 G FSD Operation & user’s manual - Page 22
22
AGA 100 G FSD Operation & user’s manual - Page 23
23
AGA 100 G FSD Operation & user’s manual - Page 24
24
AGA 100 G FSD Operation & user’s manual - Page 25
25
AGA 100 G FSD Operation & user’s manual - Page 26
26
AGA 100 G FSD Operation & user’s manual - Page 27
27
AGA 100 G FSD Operation & user’s manual - Page 28
28
AGA 100 G FSD Operation & user’s manual - Page 29
29
AGA 100 G FSD Operation & user’s manual - Page 30
30
AGA 100 G FSD Operation & user’s manual - Page 31
31
AGA 100 G FSD Operation & user’s manual - Page 32
32
AGA 100 G FSD Operation & user’s manual - Page 33
33
AGA 100 G FSD Operation & user’s manual - Page 34
34
AGA 100 G FSD Operation & user’s manual - Page 35
35
AGA 100 G FSD Operation & user’s manual - Page 36
36
AGA 100 G FSD Operation & user’s manual - Page 37
37
AGA 100 G FSD Operation & user’s manual - Page 38
38
AGA 100 G FSD Operation & user’s manual - Page 39
39
AGA 100 G FSD Operation & user’s manual - Page 40
40
AGA 100 G FSD Operation & user’s manual - Page 41
41
AGA 100 G FSD Operation & user’s manual - Page 42
42
AGA 100 G FSD Operation & user’s manual - Page 43
43
AGA 100 G FSD Operation & user’s manual - Page 44
44
Gas Connection
The gas supply needs to terminate with a down facing
bayonet. The rear cover boxes limit the position of the
supply point.
Because the height of the cooker can be adjusted and
each connection is different it is difficult to give precise
dimensions. Ideally the house supply bayonet should be
in the shaded area shown in the diagram. The hose
should be fitted so that both inlet and outlet connections
are vertical so that the hose hangs downwards in a ‘U’
shape. A 3ft hose will need to be connected from the side.
For Natural gas the flexible hose must be in accordance
with BS 269.
For LP gas it should be capable of 50mbar pressure, 70ºC
temperature rise and carry a red stripe, band or label.
If in doubt contact your supplier.
Screw connect the threaded end of the hose into the gas
inlet in the underside of the connector block on the back
of the cooker.
After completing the gas connection, check the cooker is
gas sound with a pressure test. When checking for gas
leaks do not use washing up liquid - this can corrode. Use
a product specifically manufactured for leak detection.
Pressure Testing
The gas pressure can be measured at the fish kettle
burner jet. Make sure that the cooker is not connected to
the electricity supply. Lift off the burner head. Fit the
pressure gauge to the jet. Turn on one of the other burners
and light it with a match. Turn on the control for the fish
kettle burner and press in the knob to allot the gas through
and register the pressure on the gauge.
For Natural gas cookers the pressure should be 20mbar.
For LP gas (propane) the pressure should be 37mbar.
Re-assemble the burner top, making sure it is re-
assembled in the correct way on the burner body.
32