• Home
• Brands
• AGA Manuals
• AGA legacy 110 Dual Fuel Range
• AGA PROFESSIONAL 110 Dual Fuel Users Manual And Installation Instructions

AGA PROFESSIONAL 110 Dual Fuel Users Manual And Installation Instructions

Download User's manual and installation instructions of AGA legacy 110 Dual Fuel Range Cookers, Kitchen Appliances for Free or View it Online on All-Guides.com.

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

16

Australia

The Ovens

The ovens have a removable panels which have

been coated with a special enamel that partly

cleans itself. This does not stop all marks on the

lining, but helps to reduce the amount of manual

cleaning needed.

The Cook & Clean panels work better above

200°C. If you do most of your cooking below

this temperature, occasionally remove the

panels and wipe with a lint free cloth and

hot soapy water. The panels should then be

dried and replaced and the oven heated at

200°C for about one hour. This will ensure

the Cook & Clean panels are working

effectively.

Don’t use steel wool (Brillo) or any other

materials which will scratch the surface. Don’t

use oven cleaning pads.

Removing the Oven Linings

Some of the lining panels can be removed for

cleaning and for cleaning behind. Remove the

shelves first.

The right hand fanned oven has a removable

oven roof - slide the roof liner forward and

remove.

The side panels of either oven can be removed.

Each side of the oven is fixed with four fixing

screws. You don’t have to remove the screws to

remove the oven linings. Lift each side panel

upwards and they will slide off the screws. Then

pull them forwards.

Once the linings are removed, the oven enamel

interior can be cleaned.

When replacing the linings fit the side linings

first.

Make sure you fit the oven roof with the slot at

the front.