• Home
• Brands
• AGA Manuals
• AGA legacy 110 Dual Fuel Range
• AGA PROFESSIONAL 110 Dual Fuel Users Manual And Installation Instructions

AGA PROFESSIONAL 110 Dual Fuel Users Manual And Installation Instructions

Download User's manual and installation instructions of AGA legacy 110 Dual Fuel Range Cookers, Kitchen Appliances for Free or View it Online on All-Guides.com.

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

17

Australia

Moving your cooker

Switch off the electricity supply.

The cooker is heavy, two people may be

required to move it. The cooker is fitted with

one roller at the front and two at the back.

There are also two screw down levelling feet

at the front.

The front roller, designed for moving the cooker

can be wound down. The levelling tool which

controls this roller is in the storage drawer

compartment.

Remove the storage drawer (by pulling it

right out and lifting it up slightly) and you

should see the levelling tool.

Your installer may not have left the levelling tool

in place. If not, locate it as shown. If you cannot

find the levelling tool, contact your installer. See

the inside front cover of your INSTALLATION

GUIDE.

Turn the levelling tool clockwise, two full

(180°) turns. It will be stiff. The front of the

oven will rise slightly as the roller drops

down.

Open the grill door and right hand oven door so

that you can get a good grip on the bottom of the

fascia panel as you move the oven.

Do not move the oven by pulling the hand

rail, door handles or knobs.

Move the oven a bit at a time, checking behind it

to make sure the gas hose is not caught. Make

sure both electricity and gas cables have

sufficient slack to move the cooker forward as

you go along.

A restraining chain should have been fitted

by your installer. This is intended to prevent

stressing the connection hose and will limit

the amount the cooker can move forward.

When you replace the cooker, wind it down off

the rollers by turning the levelling tool anti-

clockwise. This is important. It will stop the

cooker moving accidentally, while in use.