AGA AMLFDR20 User Instructions

Download User instructions of AGA AMLFDR20 Refrigerator for Free or View it Online on All-Guides.com.

Brand: AGA

Category: Refrigerator

Type: User instructions for AGA AMLFDR20

Pages: 32 (1.82 Mb)

Download AGA AMLFDR20 User instructions

AGA AMLFDR20 User instructions - Page 1
1
AGA AMLFDR20 User instructions - Page 2
2
AGA AMLFDR20 User instructions - Page 3
3
AGA AMLFDR20 User instructions - Page 4
4
AGA AMLFDR20 User instructions - Page 5
5
AGA AMLFDR20 User instructions - Page 6
6
AGA AMLFDR20 User instructions - Page 7
7
AGA AMLFDR20 User instructions - Page 8
8
AGA AMLFDR20 User instructions - Page 9
9
AGA AMLFDR20 User instructions - Page 10
10
AGA AMLFDR20 User instructions - Page 11
11
AGA AMLFDR20 User instructions - Page 12
12
AGA AMLFDR20 User instructions - Page 13
13
AGA AMLFDR20 User instructions - Page 14
14
AGA AMLFDR20 User instructions - Page 15
15
AGA AMLFDR20 User instructions - Page 16
16
AGA AMLFDR20 User instructions - Page 17
17
AGA AMLFDR20 User instructions - Page 18
18
AGA AMLFDR20 User instructions - Page 19
19
AGA AMLFDR20 User instructions - Page 20
20
AGA AMLFDR20 User instructions - Page 21
21
AGA AMLFDR20 User instructions - Page 22
22
AGA AMLFDR20 User instructions - Page 23
23
AGA AMLFDR20 User instructions - Page 24
24
AGA AMLFDR20 User instructions - Page 25
25
AGA AMLFDR20 User instructions - Page 26
26
AGA AMLFDR20 User instructions - Page 27
27
AGA AMLFDR20 User instructions - Page 28
28
AGA AMLFDR20 User instructions - Page 29
29
AGA AMLFDR20 User instructions - Page 30
30
AGA AMLFDR20 User instructions - Page 31
31
AGA AMLFDR20 User instructions - Page 32
32
6
Connect to Refrigerator
The water line comes down from the top on the back of the refrigerator.
Follow the connection instructions below:
1. Create a service loop (minimum diameter of 2 ft [61 cm]) with
the copper tubing. Avoid kinks when coiling the copper
tubing.
2. Remove the plastic cap from water valve inlet port. Place a
compression nut and sleeve on the copper tubing.
3. Insert the end of the copper tubing into the water valve inlet
port. Shape t
ubing slightly so that the tubing feeds straight
into the port to avoid kinks.
4. Slide the compression nut over the
sleeve and screw into the
water valve inlet port.
5. Using an adjustable wrench, hold the nut on the plastic water
line to keep it from moving. Then, with a second wrench turn
the compression nut on the copper tubing counterclockwise
to completely tighten. Do not overtighten.
6. Check connection by pulling on
copper tubing. Attach the
plastic water line to the refrigerator cabinet with a “P” clamp.
7. Turn on water supply to the refrigerator and check for leaks.
Correct any leaks.
Complete the Installation
1. Plug into a grounded 3 prong outlet.
NOTE: Allow 24 hours to produce the
rst batch of ice. Discard
the
three batches of ice produced. Allow 3 days to completely
ll the ice storage bin.
A. Plastic water tubing
B. Sleeve
C. Compression nut
D. Copper tubing
B
A
C
D
A. “P” clamp
B. Plastic water line
C. Compression nut
D. Copper tubing
B
C
D
A
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING