AGA M24AR Installation Operation And Maintenance Instructions
Download Installation, operation and maintenance instructions of AGA M24AR Refrigerator for Free or View it Online on All-Guides.com.
Brand: AGA
Category: Refrigerator
Type: Installation, operation and maintenance instructions
Model: AGA M24AR , AGA M30AR , AGA M36AR
Pages: 56 (1.46 Mb)
Download AGA M24AR Installation, operation and maintenance instructions
21
1
1
⁄8"
(28.4mm)
Typical
1
⁄4" (6.4mm) thick battens-
1
⁄4" (6.4mm) Plywood / Panel
3
⁄16" (4.8mm)
thick back up-
1
⁄8" (4.8mm)
thick back up-
1
⁄4" (6.4mm) Plywood / Panel
3
⁄16" (4.8mm) thick battens-
24
5
⁄16"
(61.8cm)
-
1
⁄16" (1.6mm) rout
2
3
⁄16"
(55.6mm)
1
⁄2" (12.7mm) Plywood / panel
5
⁄16"
(7.9mm)
Metal side panel
24"
(61cm)
typical installation
opening
Holes in
roller base-
#8 screws-
Cap-
Figure 27
Figure 28
Instructions for Fastening Side Panels to Re-
frigerator
1. Side panels should be 24 inches deep (or 24
5
⁄16 inches
deep when tucked into the front trim).
2. Panel height to match installation height.
3. Install the side panels per drawings on the right.
To avoid damage to panels or ooring, raise panels slightly,
to clear oor when installing.
Drill three (3) holes equal distance apart in vertical section
of aluminum frame and install pan head screws as shown.
Anchor side panel with screw as shown. Be sure screw
used goes no more than
1
⁄2 inch deep into product. Do NOT
overtighten.
NOTE
Kick Plate Installation
Use two (2) #8 sheet metal screws (supplied) to facilitate
holding your kick plate in place. Mount screws in holes in
roller base. Cover screw heads with caps supplied. (See
Figure 28).
INSTALLING SIDE PANELS AND KICK PLATE