• Home
• Brands
• Delfield Manuals
• Delfield SH-2-NU
• Delfield SH-2-NU Specifications

Delfield SH-2-NU Specifications

Download Specifications of Delfield SH-2-NU Food Warmer for Free or View it Online on All-Guides.com. This version of Delfield SH-2-NU Manual compatible with such list of devices, as: SH-2-NU, SH-3-NU, SH-4-NU, SH-5-NU, SH-6-NU

1

2

PROJECT

ITEM #

QUANTITY DATE

APPROVAL

The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com

Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.

Short Form

Specifications

Exterior body is constructed of

18-gauge stainless steel side panels and

14-gauge galvanized bottom. All exterior

side panels are reinforced with overlap-

ping corners and are welded in place.

All body cutouts are reinforced with

14-gauge galvanized channel supports.

Exterior top is constructed of 14-gauge

stainless steel, welded, ground and pol-

ished into one integral unit. Top is

fabricated with square exterior corners.

Top has two to six electrically heated,

recessed, die-stamped stainless steel hot

food warmers. Each warmer accommo-

dates one 12.75” x 20.75” x 6” (32.4cm

x 52.7cm x 15.2cm) pan.

Heated food warmers are constructed

of die-stamped stainless steel. Heated

food warmers are insulated on bottom.

Each heated food warmer is individu-

ally equipped with a heated element

rated at 1000 watts for 120 volt or

208/230 volt, 60 hertz, single phase

service and wired to an adjustable con-

trol switch and indicator light in the

control panel. Heated food warmers

are interwired to a maximum 10’ (3m)

long cord with a grounded plug for 120

volt or 208/230 volt, 60 hertz, single

phase electrical service.

Casters: Unit is mounted on 5”

(12.7cm) diameter swivel casters with

non-marking polyolefin tires and plate

brakes. Overall height of caster assem-

bly is 6.00” (15.2cm).

The following applies to

SH Series only.

All SH models have a one door heated

compartment. Compartment is constructed of

18-gauge stainless steel, is insulated with a

minimum of 2” (5.1cm) insulation and is pro-

vided with removable 16-gauge pan slides.

SH-2 comes with a single capacity heated

compartment; compartment that holds four

12.75” x 20.75” x 2.5” (32.4cm x 52.7c, x

6.4cm) pans. SH-3, SH-4, SH-5 and SH-6

units come with double capacity (single door)

heated compartment with a center partition;

compartment holds eight 12.75” x 20.75” x

2.5” (32.4cm x 52.7c, x 6.4cm) pans. With the

center partition removed the double capacity

compartment can hold four 18” x 26” (45.7cm

x 66cm) sheet pans. The internally mounted

heating element is rated at 890 watts, has a

louvered protective cover and is wired to a

temperature control thermostat and indicator

light in the stainless steel control panel. Doors

are built with double-wall construction, with

gaskets and stainless steel front panel.

Optional Accessories and

Modifications:

A) 12” (30.5cm) wide stainless steel

fold-down tray slide

C) 10” (25.4cm) wide three-bar fold-

down tray slide

D) 10” (25.4cm) wide composite fold-

down cutting boards

E) 10” (25.4cm) wide stainless steel

fold-down work shelf

F) Line-up interlock device

G) Glass-front counter protector

H) Two tier display with glass shelves

and sneezeguards

HD) Dual service two tier display with

sneezeguards

I) Three tier display with glass shelves

and sneezeguards

J) 12” (30.5cm) wide 18-gauge stain-

less steel overshelf

KS) Single service flip-up sneezeguard

KD) Double service flip-up sneezeguard

LI) *Incandescent light fixtures

LD) Laminate door panel insert (SC Series

only)

M) *Radiant heat lamps

MB) *Bullet-style heat lamps

P) Open understorage with shelf (SC-NU

Series only)

Q) *120V/60Hz/1ø, 10 amp convenience

outlet with breaker

QQ) Drains from food wells, plumbed to

common valve

SG5A) Single dry insert with door (SH-NU

units only)

SG5B) Double dry insert with doors (SH-NU

units only)

ST) Stainless steel trim strips

U) 14” x 30” (35.6cm x 76.2cm) stain-

less steel end drop shelf

V) 6” (15.2cm) high adjustable stainless

steel legs in lieu of casters

X) Laminate exterior panels in lieu of

stainless steel exterior panels

*Inclusion of these options will alter the elec-

trical specifications of unit.

Mobile Heated Serving Counters

Model SH-3-NU

shown with option A and G

SH & SH-NU